Protector XVS Ventilation Stations are ideal for use as light-duty fume hoods, science classroom workstations, solvent cleaning work bays, weighing stations or for pathology and cytology applications. Tempered glass, 3/16" (5 mm) tops and sides allow full visibility
Low-profile, large capacity enclosure, 23"-deep (584 mm) interior for analytical work, solvent cleaning, pathology and cytology studies
By-pass airflow design maintains stable air velocity when air sash is opened or closed, eliminating high-velocity air streams that disturb delicate procedures
Patented Clean-Sweep™ air foil draws air under the air foil to minimize “dead air” zones and maximize containment, regardless of operator position
Patented Rear baffle with perforation zones pivots down and detaches for easy cleaning
Glacier white and gray, dry powder epoxy-coated aluminum frame, and steel rear plenum and baffle construction eliminates flimsy plastic-on-plastic bonding
Angle tempered glass sash pivots upward and locks for easy loading of large materials
Includes upper containment sash foil, upper dilution air supply, and side-entry air foils for optimal air velocity stability, two utility ports with iris openings and plastic plugs, top and bottom 2" x 10" (51 mm x 254 mm) exhaust collars for connection to FilterMate Exhauster and ductwork
Available Accessories: Work Surfaces, Base Stand with Leveling Feet, Guardian Jr. Airflow Monitor, Base Stand with Casters, Fluorescent Task Light, Corrosion Resistant Remote Blower, FilterMate Portable Exhausters
* Internal Clearance: 21.6/33.6/45.6"W x 23"D x 20/29.3"H (549 mm/853 mm/1158 mm W x 584 mm D x 508/744 mm H ); Sash: 20° angle x 8" (203mm) opening, 22.8"H (579mm) models, 14° angle x 10" (254mm) opening, 32"H (813mm) models. Sash locking (open) position: 20"/29.25" (508 mm / 743mm) respectively.
** With sash closed, 8" (203mm) opening for 22.8"H (579mm) models, 10" (254mm) opening for 32"H (813mm) models
† 2'/3'/4'W x 26.7"D (610 mm / 914 mm / 1219 mm x 678mm)
Base Stand with Leveling Feet
Durable 1.75" (44 mm) tubular, epoxy-coated steel construction and glacier white exterior. Telescoping legs are adjustable in 1" (25 mm) increments from 27.5" to 33.5" (698 mm to 851 mm). Includes leveling feet. Order work surface separately.
Items with prices in blue usually ship within 3 – 5 days of order.
Select HEPA filter, carbon filter, or combination of both to remove hazardous powders, particulates or vapors from the exhaust air stream
Converts the Protector™ XVS™ Ventilation Station into a ductless fume hood
Guardian Jr. Airflow Monitor
Top-mount unit, adds 6.4"H (163 mm) allows easy selection and calibration of a setpoint between 30 and 250 fpm (.15 m/s & 1.25 m/s). If hood’s face velocity falls below this level for more than six seconds, the unit issues an audible alarm sound and visible ALERT indication.