FREE CONSULTATION714-578-6100
  1. Home
  2. Glove Boxes
  3. Controlled Atmosphere Glove Boxes
  4. Labconco Precise Controlled Atmosphere Glove Boxes

Precise Controlled Atmosphere Glove Boxes
by Labconco

Controlled Atmosphere Glove Box
The Labconco Precise Controlled Atmosphere Glove Box
  • Protects sensitive materials from oxygen and moisture contamination
  • Achieves oxygen levels as low as 5 ppm and moisture levels as low as 50ppm
  • One-piece molded, medium density polyethylene shell
  • Contains a laminated safety glass viewing window, 1/4" (6 mm) thick with powder-coated steel frame and neoprene gasket
  • Leak-tested with a mass spectrometer while glove box is pressurized with Helium at 5 inches of water gauge
  • Meets Class 1 atmosphere containment conditions for oxygen leak rates
  • Consists of a pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge
  • Includes six manual valves with 3/8" (10 mm) compression fittings
  • Readings from the transfer chamber pressure gauge from 0 to -29 inches of mercury
  • Transfer chamber high vacuum sleeve and interior interlocking shelf included.
Ordering Information
Quick Ship Item Items with prices in blue usually
ship within 3 – 5 days of order.
cleanliness high
Precise Controlled Atmosphere Glove Boxes
Type Power Supply Labconco # Cat. # Price
Single Models
(2 glove ports)
120 VAC, 60 Hz 5220100 3644-43 $ 7,946
220VAC, 50/60Hz 5220120
5220121
5220130
5220131
3644-43-220 Price
Controlled Atmosphere Glove Box
Gauges of the Labconco Precise Controlled
Atmosphere Glove Box
Labconco's Precise Controlled Atmosphere Glove Boxes have valves for evacuating and filling the chambers as well as drying train connections to achieve low oxygen levels for work with organometallics, alternative energy cells or hydrophilic chemicals.

Six Manual Valves with 3/8" (10 mm) Compression Fittings and 3/8" (10 mm) Hose Barbs Two valves are located both on the main chamber and transfer chamber for evacuating and re-filling the chambers via a vacuum pump and inert gas. The remaining two valves on the main chamber can be connected to a continuously re-circulating oxygen and moisture removal system-creating and preserving levels of 1 to 5 ppm oxygen. Additionally, each box has been factory tested to have no detectable leaks greater than 0.0001 ml/sec.

Chamber and Pressure Gauge

Main chamber pressure gauge monitors pressure between -5 to +5 inches of water gauge. The Pressure Relief valve activates at ±6 inches water gauge, preventing damage to the window should internal pressure exceed operational limits. The transfer chamber includes an epoxy-coated steel high vacuum sleeve to allow transfer chamber evacuation without distortion. The transfer chamber pressure gauge monitors pressure/vacuum from 0 to -29 inches of mercury.

Glove Box Construction

Precise Controlled Atmosphere Glove boxes are made of a one-piece molded, medium-density polyethylene liner (shell). This provides a durable surface that is resistant to chemical corrosion and physical damage and simplifies cleaning with its coved interior corners. Located above the glove box shell is a dry-powder epoxy-coated steel superstructure for utility placement. This superstructure has superior corrosion resistance. Additionally, the glove box contains a laminated safety glass viewing window, 26.4"W x 12.5" H (671 mm x 318 mm) with a powder-coated steel frame and neoprene gasket that provides a tight seal. The window is removable which allows for placement of large equipment inside the glove box. The Precise Basic glove box also comes with space-saving acrylic inner and outer transfer chamber doors. These doors pivot upward to save space and are counterbalanced and equipped with quick latches.

Precise Controlled Atmosphere Glove Boxes Also Feature:

An interior ceiling-mounted electrical receptacle with 5 amp maximum (115Volt models) or 2 amp maximum (230 Volt models) circuit load that provides power for instrument use within the glove box. The transfer chamber, with internal dimensions of 11" x 12" (279 mm x 305 mm) has an interlocking flat shelf of dry powder-coated epoxy steel to permit objects to stand upright. There is a large internal work area to allow for 13 cubic feet (713.6 m³/hr) of interior space within the main chamber, 22 watt- fluorescent lamp, and control switches for the fluorescent light and innermost interior receptacle.
Specifications

 

Domestic or
International
Specifications
Precise Controlled Atmosphere Glove Box
Item Dimensions Domestic: 52.7"W x 31.6"D x 40.0"H
1339 mm x 803 mm x 1016 mm
International: 52.7"W x 31.6"D x 40.0"H
1339 mm x 803 mm x 1016 mm
Electrical Specifications Domestic: 100-115V; 50/60Hz, 8 Amps
International: 230V; 50/60Hz, 4 Amps
Power Cord & Plug Domestic: 115V; 8 Amps
International: 230V; 4 Amps, no plug
Interior-Mounted Electrical Outlets Domestic: 115V
International: 230V
Number of Glove Ports Domestic: 2
International: 2
Primary Applications Domestic: Working with Atmosphere-Sensitive Materials
International: Working with Atmosphere-Sensitive Materials
Liner Material Domestic: Polyethylene
International: Polyethylene
Interior Working Width Domestic: 33.5" (851 mm)
International: 33.5" (851 mm)
Required Accessories Domestic: Supporting Base or Work Surface and Base Cabinet
International: Supporting Base or Work Surface and Base Cabinet
Compliance Domestic: ETL Listing, UL 3101-1/61010-1 and CAN/CSA C22.2 No.1010.1 conformity
International: CE Conformity Marking

Required Accessories

Base Stands
Each Basic glove box requires a supporting base and a Base Cabinet

  Adjustable Height Mobile Base Stand
Adjustable Height Mobile Base Stand with 5" (127 mm) casters has durable 2" (51 mm) tubular glacier white epoxy-coated steel frame with permanently-mounted black laminate hard board work surface. Includes lower shelf, 47"W x 18"D (1194 mm x 457 mm), to accommodate accessory equipment such as a pump. Telescoping legs adjust in 1" (25 mm) increments to seven overall height positions from 33" to 40" (838 mm to 1016 mm). Overall dimensions: 60"W x 31"D (1524 mm x 787 mm).
Quick Ship Item Items with prices in blue usually ship within 3 – 5 days of order.
Labconco # Cat. # Price
5235500 3643-22 Price
   
  Adjustable Height Stationary Base Stand
Adjustable Height Stationary Base Stand with leveling feet has durable 2" (51 mm) tubular glacier white epoxy-coated steel frame with permanently-mounted black laminate hard board work surface. Includes lower shelf, 47"W x 18"D (1194 x 457 mm), to accommodate accessory equipment such as a pump. Telescoping legs adjust in 1" (25 mm) increments to seven overall height positions from 33" to 40" (838 to 1016 mm). Overall dimensions: 60"W x 31"D (1524 x 787 mm).
Labconco # Cat. # Price
5235501 3643-23 Price
   
  Double Glove Box Mobile Base Stand
Double Glove Box Mobile Base Stand has epoxy-coated welded steel base with black phenolic laminate work surface. Height is adjustable, and lower shelf provides extra space.
Labconco # Cat. # Price
5062020 3643-24 Price
   
Base Cabinets and Accessories
 

Protector Standard Base Cabinet

Provides support for the full line of benchtop Labconco fume hoods or glove boxes. Cabinets may be mixed or matched so that their total width equals the width of the fume hood or glove box they support.
Quick Ship Item Items with prices in blue usually ship within 3 – 5 days of order.
Product Labconco # Cat. # Price
Protector Standard Base Cabinet 9900200 3646-53 Price

Corresponding Options

Evacuating and Filling

  Rotary Vane Direct Drive Vacuum Pumps
Provide a reliable vacuum source for evacuating the main chamber and/or transfer chamber. These pumps are available with displacement capacities of 117 or 195 liters per minute (at 60 Hz). These pumps are two-stage and oil-sealed with gas ballast control. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure. Oil mist exhaust filter, vacuum pump oil and inlet adapter(s) suitable for 1/2" (13 mm) OD and 3/4" (19 mm) OD are provided.
Quick Ship Item Items with prices in blue usually ship within 3 – 5 days of order.
Direct Drive
Rotary Vane Vacuum Pumps
Labconco # Cat. # Price
115 V (Includes 115V NEMA 5-15P Plug) 1472100 3643-79 $ 3,233
230 V (Includes 230V NEMA 6-15P Plug) 7739400 3643-80 Price
230 V (Includes 230V reverse IEC Plug) 7739402 3643-81 Price

Terra Universal offers additional vacuum chambers and controllers to meet your vacuum source needs.
   
  Automatic Pressure Controller
For automatic control of the main chamber pressure (-5 to +5 inches of water gauge), main chamber purging and filling cycles (up to 199 cycles), and transfer chamber purging and filling cycles (up to 199 cycles). Regulates vacuum/pressure between -5 and +5 inches of water gauge in the main chamber and between 0 and -29 inches of mercury in the transfer chamber. A mutable, audible alarm sounds when pressure/vacuum level is outside set limits. Epoxy-coated steel casing with a front panel LCD display and a rear panel with power switch, power inlet connection with circuit breakers, electrical receptacle for connection to vacuum pump (sold separately), electrical connection for foot pedal, two solenoid valves for controlling gas in and gas/vacuum out to transfer chamber, and two solenoid valves for controlling gas in and gas/vacuum out to main chamber. Unit of measure display options are inches of water, inches of mercury, and mBar. A three-position foot pedal (increase gas/fill, off, purge/decrease gas) provides hands-free control of the gas inlet and vacuum outlet valves. Designed for mounting atop the transfer chamber exterior. Include mounting bracket, hardware, 3/16" (5 mm) ID polyvinyl tubing, 3/32" (2 mm) ID polyvinyl tubing, and power cord with plug. Requires Installation; must be ordered together with affected glove box.
Power Supply
Labconco # Cat. # Price
115V, 50/60 Hz 5238600 3643-43 Price
230V, 50/60 Hz 5238601 3643-43-220 Price
   
  Vacuum Connection Kit
For connecting glove box exhaust in parallel with transfer chamber and vacuum pump. Includes neoprene vacuum tubing, 3/4" ID x 1/2" wall x 3 feet long (19 mm x 13 mm x 914 mm); neoprene vacuum tubing, 3/4" ID x 1/2" wall x 1 foot long (19 mm x 13 mm x 305 mm); stainless steel reducing tee, 7/8" x 7/8" x 3/8" OD (22 mm x 22 mm x 10 mm); vacuum tubing, 5/16" ID x 3/16" wall x 3 feet long (8 mm x 5 mm x 914 mm); copper tubing, 3/8" OD x 12" (10 mm x 305 mm) long, to connect with the glove box exhaust fitting.
  Labconco # Cat. # Price
Automatic Pressure Controller Gas and Vacuum Tubing Connection Kit 5245200 3643-62 Price
Manual Valve Gas and Vacuum Tubing Connection Kit 5245100 3643-61 Price
   
  Complete Valve Kit
Includes the six each manual ball valves, pressure relief valve, compression fittings, hose connector fittings, hole saws, O-rings and nuts to add four service valves to the main chamber and two service valves to the transfer chamber. Two of the valves on the main chamber and two on the transfer chamber may be used for evacuating and filling. The remaining two on the main chamber are for drying train connections. Requires installation.
  Labconco # Cat. # Price
Complete Valve Kit* 5232101 3643-28 Price
*Precise Controlled Atmosphere Glove Boxes include six manual valves
   
 

Add-A-Valve Kit
includes the manual ball valve, compression fitting, hose connector fitting, O-ring and nut to add a service valve to the main chamber or transfer chamber. Requires installation and 0.688" diameter.

Add-A-Valve Installation Kit
Includes 0.688" (17 mm) diameter holesaw, arbor and instructions.
  Labconco # Cat. # Price
Add-A-Valve Kit* 5225701 3643-19 Price
*Precise Controlled Atmosphere Glove Boxes include six manual valves
   
  Valve Identifier Labels
Includes labels for VAC, GAS IN, OUT, AR, NIT, AIR, CO2, and CW. For use when adding service valves.
  Labconco # Cat. # Price
Valve Identifier Label Set 5236600 3643-35 Price
   
  Main Chamber Pressure Gauge
Monitors pressure between -5 to 5 inches of water gauge. Includes pressure gauge, hose and fittings.
  Labconco # Cat. # Price
Main Chamber Pressure Gauge Kit** 5237800 3643-37 Price
*Precise Controlled Atmosphere Glove Boxes include six manual valves
   
  Transfer Chamber Pressure Gauge Kit
Monitors pressures between 0 and -29 inches of mercury. Mounts atop the glove box. Includes vacuum gauge, hose mounting brackets, and fittings. Transfer

Chamber High Vacuum Sleeve
Epoxy-coated steel cylinder fits inside the transfer chamber to reinforce the walls of the transfer chamber under high vacuum conditions.
  Labconco # Cat. # Price
Transfer Chamber Pressure Gauge Kit** 5237900 3643-38 Price
Transfer Chamber High Vacuum Sleeve** 5236200 3643-40 Price
**Included with the Precise Controlled Atmosphere Glove Boxes
   

Pressure Relief

 

Pressure Relief Valve
Activates at pressure/vacuum above 6 inches water gauge and below -6 inches water gauge to prevent over or under pressurization of the main chamber. Complete Valve Kit. Requires installation and a 2.06" (52 mm) diameter hole.

Pressure Relief Valve Vent Kit-
Provides the components necessary to exhaust the pressure relief valve during over pressurization. Includes 3.9" OD x 3.8" (99 mm x 97 mm) ID thimble connection, gasket, two elbows, four clamps and 13" (330 mm) long tubing for ducting to the outside. Requires Pressure Relief Valve and outside venting. Ductwork for outside venting is not included.
  Labconco # Cat. # Price
Pressure Relief Valve* 5230600 3643-27 Price
Pressure Relief Vent Kit** 5242700 3643-98 Price
*Included with Precise Controlled Atmosphere Glove Boxes and Complete Valve Kit
**Requires Pressure Relief Valve and outside ducting
   
  HEPA-Filtered Pressure Relief Vent Kit
Includes 99.99% efficient HEPA filter for ducting to the outside or room.

Carbon-Filtered Pressure Relief Valve

Includes activated carbon filter. For ducting to the outside or the room.
  Labconco # Cat. # Price
HEPA-Filtered Pressure Relief Vent Kit 5238500 3643-41 Price
Carbon-Filtered Pressure Relief Valve 5241200 3643-99 Price
   

Low Oxygen and Moisture Level Removal

 

Oxygen and Moisture Removal Column
Provides less than 5 ppm oxygen and less than 50 ppm moisture (refillable).

Oxygen and Moisture Removal Column Support Stand
Supports Oxygen and Moisture Removal Column (sold separately).
  Labconco # Cat. # Price
Oxygen and Moisture Removal Column* 5244200 3643-54 Price
Stand for Column 5244300 3643-55 Price
*Requires connection to two manual valves on the main chamber and a diaphragm vacuum pump for atmosphere/moisture removal and recirculation
   
  Oxygen and Moisture Drying Train Tubing Kit
includes tubing and fittings for connection to 5244200 Oxygen and Moisture Removal Column (sold separately).
  Labconco # Cat. # Price
Oxygen and Moisture Removing Tubing Kit 5242501 3643-53 Price
   

Moisture Monitoring

  Moisture Monitor/Hygrometer, 1-1000 ppm
For placement inside the main chamber to continuously monitor moisture levels. Measure absolute moisture content in gas. Detect levels from 0 to 10,000 ppm (with three ranges of 0-100 ppm, 100-1,000 ppm, and 1,000 to 10,000 ppm) with ±1 % accuracy. Consists of chemically inert ceramic technology moisture sensor, sampling block, digital display monitor, sampling pump, switching power supply and on/off switch
Power Suplly Labconco # Cat. # Price
110/115V, 50/60Hz 5442400 3643-59 Price
230V, 50/60Hz 5442500 3643-59 Price
   
  Hand-held Digital Hygrometer
0-100%-Battery operated instrument that measures both percent relative humidity (%RH) from 0-100%, with ±2% accuracy and temperature in F or C with ±1 F(±0.% C) accuracy. Calculates the dew point temperature and wet bulb temperature based on relative humidity and temperature readings. Minimum and maximum temperature and relative humidity readings may be stored in the memory. Hold function freezes reading. Memory function stores up to 25 sample readings. Includes 9V alkaline battery. Shipping weight 1.5 lbs (680 g.)
  Labconco # Cat. # Price
Hand-Held Digital Hygrometer 5244800 3643-58 Price
   

Oxygen Monitoring

  Oxygen Monitor, 0-10,000 ppm
For detectable trace oxygen levels using an electrochemical sensor. Provide a digital readout in three measurement ranges of 0-100 ppm, 100-1,000 ppm and 1,000-10,000 ppm. Accuracy is ±1% of full scale. Readout displays on 4 1/2 digit LCD. Equipped with three user-configurable oxygen alarm relays and one user-configurable status alarm relay. Includes audible alarm and three front panel LED visual alarms. 4-20 mADC and 0-2 VDC analog outputs. Casing is water-tight polycarbonate with gasketed seals. Gas inlet and outlet connections are 1/4" (6 mm) stainless steel compression fittings. Dimensions: 8.3"W x 6.2"D x 10.9"H (211 mm x 157 mm x 277 mm)
  Labconco # Cat. # Price
110/115V, 50/60Hz 5442400 3643-57 Price
230V, 50/60Hz 5442500 3643-57-220 Price
   
  Oxygen Monitor, 0.1-100%
Measures percent of oxygen inside the glove box using a chemically-resistant electrochemical sensor. Front LCD panel displays percentage from 0.1 to 100%. Includes ten feet of interconnecting sensor cable, which may be installed through a drilled hole in the main chamber’s wall, and power cord for connection to the glove box’s interior electrical receptacle. An “O” ring is provided to help form a gas-tight seal. Measurement range is 0.1 to 100% oxygen (±1% of full scale at 77° F (25°C) and 29.92" Hg). Rated for general purpose service as low as 1000 ppm (0.1%).Mounting bracket is provided for hanging from Rear Interior Shelf Kit (sold separately). For 115/230 volt, 50/60 Hz operation. Installation and 0.29" (7 mm) drill hole are required.
  Labconco # Cat. # Price
Oxygen Monitor 0.1-100% 5244400 3643-56 Price
   

Drying Train Accessories

A chemical trap to remove organic solvents, acids, ammonia, radioisotopes or moisture. The trap is connected to 2 main chamber service valves and a diaphragm pump for recirculation of the main chamber atmosphere and containment removal. Precise Glove boxes include main chamber service valves. For all other boxes, two valves are required (Add-A-Valve Kit and Complete Valve Kit options)
 

Canister with Stand
Accommodates any trap insert listed below. Clear polypropylene canister allows visual inspection of trap content

Moisture & Solvent Trap Insert
Contains molecular sieve to provide less than 50 ppm moisture.

Acid Trap Insert
Contains acid neutralizing desiccant that changes from off-white to purple when exhausted

Radioisotope Insert
Contains activated caron

Ammonia Trap Insert
Contains impregnated carbon

  Labconco # Cat. # Price
Canister with Stand 7815301 3643-82 Price
Moisture & Solvent Trap Insert 7815200 3643-83 Price
Acid Trap Insert 7814800 3643-84 Price
Radioisotope Trap Insert 7815000 3643-85 Price
Ammonia Trap Insert 7995600 3643-86 Price
   
  Drying Train Tubing Kit
Kit includes 25' (7620 mm) fluorinated ethylene propylene (FEP) tubing and eight tubes inserts to connect drying train components.
  Labconco # Cat. # Price
Drying Train Tubing Kit 5242500 3643-52 Price

Flowmeter
For inline drying train connection, provides visual confirmation of drying train circulation.
  Labconco # Cat. # Price
Flowmeter 5244100 3643-91 Price

Gas and Vacuum 0.2 Micron Filter
Traps particulates. For drying train or vacuum pump exhaust. 0.25" x 0.38" (6 mm x 10 mm) ID. Shipping weight 0.5 lbs (228 g).
  Labconco # Cat. # Price
Gas and Vacuum 0.2 micron Filter 5240100 3643-44 Price
   
  Diaphragm Pumps
For drying train circulation. Single cylinder oil-less diaphragm pumps with permanently lubricated bearings and mounted on rubber feet. Provide 206 mBar ultimate vacuum. 1/8 hp motor, die cast aluminum, 1/4" (6 mm) diameter inlet and outlet connections, dimensions 4.8"W x 8.0"D x 7.0"H (122 mm x 203 mm x 178 mm) with a shipping weight of 11lbs (4990 g.).
Power Supply Labconco # Cat. # Price
115V, 60Hz, 3.3A 5248200 3643-65 Price
230V, 50Hz, 1.5A 5248201 3643-65-220 Price

General Accessories for Precise Controlled Atmosphere Glove Boxes

Glove Box Gloves
 

Neoprene Gloves—One piece, seamless, 0.015 gauge with O-rings. One pair of size 9 3/4 is included with each Precise Glove box

Butyl Gloves—One piece, seamless, 0.015 gauge. Provides high impermeability to water vapor, gases and toxic chemicals. Resistant to oxygenated solvents and most oxidizing chemicals. With O-rings.

Hypalon Gloves—One piece, seamless, 0.015 gauge. Resistant to abrasion, ozone and oxidizing chemicals. With O-rings.

Latex Gloves-Size 9 3/4—One piece seamless, 0.015 gauge. For use when dexterity is needed. Limited protection with O-rings and springs. Shipping weight 3 lbs (1361 g.)

Material Size Quantity Labconco # Cat. # Price
Neoprene 8 1/2 One pair 5005500 3643-00 Price
Neoprene 9 3/4 One pair 5005600 3643-03 Price
Butyl 8 1/2 One pair 5005501 3643-01 Price
Butyl 9 3/4 One pair 5005601 3643-04 Price
Hypalon 8 1/2 One pair 5005502 3643-02 Price
Hypalon 9 3/4 One pair 5005602 3643-05 Price
Latex 9 3/4 One pair 5005603 3643-06 Price
   

Glove Box Hands

 

Neoprene Hands—Light weight, embossed with firm-hold finish. For use with either Neoprene straight or accordion sleeves

Latex Hands-White surgical-type Hands. For use with either Neoprene Straight or Accordion Sleeves.

Material Size Quantity Labconco # Cat. # Price
Neoprene 7 3/4 Package of 12 pair 5006000 3643-09 Price
Neoprene 9 Package of 12 pair 5006100 3643-10 Price
Neoprene 10 Package of 12 pair 5033100 3643-13 Price
Latex 7 One pair 5006200 3643-11 Price
Latex 9 One pair 5006300 3643-12 Price
   

Glove Box Sleeves

  Neoprene Straight Sleeve—For use with any hands. With O-rings and springs. Shipping weight 3 lbs (1361 g.)

Neoprene Accordion Sleeves
—For use with any hands. With O-rings and springs. Shipping weight 3 lbs (1361 g.)
Material Style Labconco # Cat. # Price
Neoprene Straight 5005800 3643-07 Price
Neoprene Accordion 5005900 3643-08 Price

Miscellaneous Accessories

  Electrical Power Strips
Provide electrical receptacles for connecting instruments and equipment inside the glove box. Include an electrical cord and plug, which may be plugged into the glove box's interior electrical duplex receptacle. Shipping weight 3 lbs (1361 g.)
Power Supply Labconco # Cat. # Price
United States: 115V, 5 A, 4 receptacles 5211500 3643-16 Price
United Kingdom 250V, 2 A, 6 receptacles 5210600 3643-16-220 Price
European: 250V, 2 A, 4 receptacles 5290400 3643-16-220 Price
Australian: 250V, 2 A, 6 receptacles 5332600 3643-16-220 Price
   
  Electrical 9-Pin Sealed Pass-Through Kit
provides a leak tight connection for data transfer to a customer-supplied printer or computer located outside the glove box. Includes sealed 9 pin connector and 10' (3048 mm) cord. Installation Kit is recommended

Electrical 9-Pin Pass-Through Installation Kit

Kit includes drill bits and hole saws for installing 5075619 Electrical 9 Pin Sealed Pass-Through in a glove box's fiberglass liner or polyethylene shell. Not for use with stainless steel-lined glove boxes.
  Labconco # Cat. # Price
Electrical 9 Pin Sealed Pass-Through Kit* 5075619 3643-14 Price
Electrical 9 Pin Sealed Pass-Through Installation Kit 5241100 3643-15 Price
* Requires installation and drill hole
   
 

Mechanical or Electrical Pass-Through Kit
Provides three pass-through ports with sealing ID ranges 0.230/0.395, 0.230/0.530, 0.450/0.750. Useful for sealing cords and plumbing. Requires installation and drill hole. Shipping weight 1 lb (454 g.)

Installation Kit for Mechanical or Electrical Pass-Through
Kit includes drill bits for installing Mechanical or Electrical Straight Pass-Through in a glove box's fiberglass liner or polyethylene shell. Not for use with stainless steel-lined glove boxes.
  Labconco # Cat. # Price
Mechanical or Electrical Pass-Through Kit* 5240700 3643-17 Price
Installation Kit for Mechanical or Electrical Pass-Through 5240800 3643-17 Price
   
  Acrylic Viewing Window
Has 1/2" (13 mm) thick acrylic pane with dry powder, epoxy-coated steel frame. Replaces standard laminated glass window.
  Labconco # Cat. # Price
Acrylic Viewing Window 5236100 3643-33 Price

Anti-Static Ionizer Fans
Anti-Static Ionizer Fan circulates ionized air inside the glove box to reduce static charge. Includes hardware to mount to the main chamber ceiling. Requires installation.
Power Supply Labconco # Cat. # Price
100/115V, 50/60Hz 5234400 3643-29 Price
230V, 50/60Hz 5234401 3643-29-220 Price

Balance Vibration Isolator
Minimizes vibration to sensitive balances. Includes a 13.4"W 20.4"D 2.7" (340 mm x 518 mm x 69 mm) thick marble slab, four isolator pads, and a type 304 stainless steel protective top cover. Included with XPert Weigh Boxes.
Labconco # Cat. # Price
5234600 3643-30 Price
   
  Vacuum Aspirator Kits
Includes valve, hose, canister and diaphragm vacuum pump for evacuating fluid spills in the glove box interior. Chemical-resistant diaphragm pump draws 12 liters/minute with on/off switch and manual/foot pedal control switch. Autoclavable, two-liter glass container allows safe collection and disposal of hazardous liquids. Float valve automatically seals the container to prevent overfilling and backflow into the pump. A 0.0 µm filter traps airborne particulates, preventing pump contamination. Housed in compact case with handle. Includes silicone tubing, pipetting holder, pipette tips and drain valve. Requires installation and 0.688" (17 mm) diameter. drill hole in glove box wall to route tubing from glove box interior to remotely-located pump. Overall dimensions: 13" w x 6.8" D x 15" H (33 mm x 17 mm x 38 cm).
Power Supply Labconco # Cat. # Price
115V, 60Hz, 0.4 A 5241800 3643-48 Price
230V, 50/60Hz, 0.2A 5241801 3643-48-220 Price
   
  IV Bar Kit
Supports intravenous solutions, bottles, and bags. Includes 21.2" (538 mm) long stainless steel bar, mounting hardware and four snap hooks. Shipping weight is 5lbs (2268 g.)
Labconco # Cat. # Price
5242100 3643-50 Price

Exterior Transfer Chamber Shelf
Shelf mounts to top of transfer chamber to maximize exterior work area. Dry powder epoxy-coated steel, 10.7" W x 15.1" D (272 mm x 384 mm) .
Labconco # Cat. # Price
5245900 3643-64 Price
   
  Interior Glove Port Covers
Quickly seals glove box should sudden leak occur due to glove damage. Stainless steel with molded rubber gasket and spring-loaded latches with adjustable closure knob.
Labconco # Cat. # Price
5060400 3643-77 Price
   
  External Glove Port Covers
May be placed over glove ports with or without gloves attached to facilitate purge/fill operations and preserve inert atmosphere. Constructed of molded neoprene. Includes two clamps. Set of two.
Labconco # Cat. # Price
5242200 3643-51 Price
   
 

Interior Strorage Shelf Kits

 
Rear Shelf Kit
With stainless steel slotted back for mounting Hanging Shelf Kits (sold separately). Assembled dimensions 22.2"W x 20.0"H x 4.4"D. (564 mm x 508 mm x 112 mm)

Left Side Shelf Kit
Assembled dimensions 21.2"W x 20.0"H x 4.4"D (538 mm x 508 mm x 112 mm)
  Dimensions Labconco # Cat. # Price
Rear Shelf Kit
22.2" W x 20.0"H x 4.4"D
564 mm x 508 mm x 112 mm
5235000 3643-31 Price
Left Side Shelf Kit
21.2" W x 20.0"H x 4.4"D
538 mm x 508 mm x 112 mm
5235001 3643-32 Price
   
  Hanging Storage Accessories
 
Utility Shelves
Consists of three epoxy-coated steel shelves that hold a printer, utensils, and other miscellaneous supplies. The utensils shelf has a scalloped front edge to support spatulas, brushes and other items.

Bottle Holder

Epoxy-coated steel holder with 3" (76 mm) diameter opening holds a squirt bottle or other round container.

Tissue Holder-Epoxy
Coated steel holder accommodates a box of tissues in the upside down or upright position. An opening in the holder permits wipes to be dispensed from the bottom.

Organizer Bin
Plastic 5.4" (137 mm) container holds miscellaneous small items.

Organizer Bin
Plastic 7.4" (188 mm) container holds miscellaneous small items.

  Labconco # Cat. # Price
Utility Shelves 3925000 3643-66 Price
Bottle Holder 3927700 3643-67 Price
Wipes Holder 3927800 3643-68 Price
Organizer Bin 5.4" (137 mm), Plastic 5247300 3643-69 Price
Organizer Bin 7.4" (188 mm), Plastic 5247301 3643-70 Price
   
  Remote Blowers
For ducting glove boxes. To exhaust the pressure relief valve. Direct drive blower has a 1/4 hp TECF-type motor and overcomes external static pressure of 0.5" (13 mm) at 420 CFM (0.2 m³/s). Housing and impeller are corrosion-resistant, phenolic-coated steel. Blower inlet is 5.94"OD (151 mm) and is sized to accept 6" (152 mm) nominal diameter PVC duct. Blower outlet is 4.25" x 7.38" (108 mm x 187 mm) OD. Dimensions: 14.6"W x 13.5"D x 13.25"H.(371 mm x 343 mm x 337 mm) Damper is required.
  Labconco # Cat. # Price
115V, 60 Hz, 4.4 A* 4863500 3646-32 Price
115/230V 50Hz, 5.6/2.8A* 4863501 3646-32-220 Price
*Damper is required
   
  Dampers
  Labconco # Cat. # Price
Damper 6" (152 mm) diameter, PVC 4724200 3643-97 Price
Damper 6" (152 mm) diameter, Powder-coated Steel 3924000 3643-96 Price
   
  Guardian Jr. Airflow Monitor
Monitors airflow or pressure relief valves. Alerts the operator to airflow conditions outside of preset range. Includes face plate with circuit board, electrical power pack, vinyl tubing, airflow tube adapter and epoxy-coated steel casing.
  Labconco # Cat. # Price
Guardian Jr. Airflow Monitor* 5242000 3643-49 Price
*Requires Installation
24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com