Fan/Filter Units (FFUs) and Power Distribution Modules
|
Refer to the Application Guidelines for recommendations on quantities to meet specified requirements for cleanliness and lighting.
|
|
|
|
 |
Fan/Filter Unit
|
|
|
|
|
| Models below are UL and UL-Canadian listed. CE marked models available; inquire when ordering |
|
| Other Fan/Filter Configurations Available |
| |
Room-Side Relaceable FFU
Allows fast filter replacement without roof access |
| |
High Static-Pressure FFU
Ideal for recirculation or ducted rooms, as well as hoods |
| |
Low-Energy FFU
Both AC and DC units available for energy cost savings. "Smart" motors allow centralized control and dynamic balancing. |
| |
304 Stainless Steel
Features a 304 stainless steel housings |
| |
Explosion-Resistant FFU
Includes a heavy-duty, non-sparking impeller encased in a rugged housing |
| |
Call to discuss your application! |
|
WhisperFlow™ Fan/Filter Units (FFUs)
- Low-profile design allows cleanroom installation inside rooms with standard 9-foot (2743 mm) ceilings
- Quiet, low-vibration design: only 50 dBA, measured 30" (762 mm) from filter face @ 90 FPM (.5 m/s)
- Provides an average airflow velocity of 90+ feet per minute (.45+ m/sec) and airflow of 640+ CFM (1088 m³/hr) under filter load at medium speed (2' x 4', 610 mm x 1219 mm, model)
- Three-speed switch provides simplifies air balancing (see below for EnergySaver Remote Control System)
- Meets IEST Recommended Practices
These reliable, self-powered Fan/Filter Units provide a uniform flow of microfiltered air to meet cleanliness standards down to Class 10 (ISO 4).
All models use a 3-speed, centrifugal-type fan/motor with permanently lubricated bearings mounted inside a white powder-coated steel housing with drop-in prefilter (stainless steel available).
Advanced baffling technology ensures uniform airflow across the filter face and attenuates sound. Select HEPA (High-Efficiency Particulate Air) filters, rated 99.99% efficient at removing particle ≥ 0.3 microns, or ULPA (Ultra-Low Penetration Air) filters, rated 99.9995% efficient at removing particles ≥ 0.128 microns. Provides years of no-maintenance, 24/7 operation, depending on your air quality.
| Specifications |
| Dimensions: |
See chart below |
| Housing: |
Plenum is cold rolled steel finished with white powder baked enamel. Compatible with 1-1/2” (38 mm) grid on 24” x 48” (610 mm x 1219 mm) centers or 2” (51 mm) grid on 24.5” x 48.5” (622 mm x 1232 mm) centers. |
| HEPA Filter: |
HEPA filter is 99.99% efficient on removal of particles 0.3 microns and larger by DOP test. Filter module must be removed from the ceiling for HEPA filter replacement. |
| Prefilter: |
20” x 20” x 1” (508 mm x 508 mm x 25 mm)– UL classified for Class 1; rated 80% efficient on linty dusts |
| Blower: |
Forward curved centrifugal type factory balanced. Entire motor/blower assembly is removable from top of housing for service. |
| Motor: |
1/4 HP Direct drive, energy efficient. Permanent split capacitor type. Thermally protected with automatic overload reset. |
| Electrical: |
3-speed motor switch (lo-med-high) and separate on/off switch (2 x 4, 610 mm x 1219 mm, models). Motor leads are wired to a Mencom 4- pin connector for field connection. |
| Face Grille: |
Face grille perforated anodized aluminum. |
| Noise Level: |
50 dBA |
| Weight: |
See chart below |
| Support: |
1/4” (6 mm) eyebolts are installed in all (4) corners for hangwire support |
|
All prices below include installation on a specified Terra modular cleanroom.
| Fan / Filter Unites with HEPA Filter |
| Model |
Dimensions
Inches
(mm) |
Wt.
Lbs.
(Kg) |
Avg.
CFM
@ MS
(m3/h) |
Airflow ft/min(m/s) |
Run Amps (Watts)
@ 60Hz |
Power |
With HEPA Filter |
| HS |
MS |
LS |
HS |
MS |
LS |
Cat. # |
$/Each |
| 2 x 4 |
23.63 x 47.63 x 12.51
(600 x 1210 x 318) |
71
(32) |
717
(1218) |
115
(.58) |
102
(.51) |
93
(.47) |
4.3A
(512W) |
3.5A
(416W) |
3.3A
(393W) |
120VAC,
60 Hz |
6601-24-H |
Login
|
220VAC,
60 Hz |
6601-24-H-220 |
Login
|
| 2 x 3 |
23.63 x 35.63 x 12.51
(600 x 905 x 318) |
53
(24) |
602
(1023) |
121
(.61) |
116
(.59) |
106
(.54) |
4.1A
(500W) |
3.1A
(378W) |
2.7A
(329W) |
120VAC,
60
Hz |
6601-23-H |
Login
|
220VAC,
60 Hz |
6601-23-H-220 |
Login
|
| 2 x 2 |
23.63 x 23.63 x 12.51
(600 x 600 x 318) |
44
(20) |
558
(948) |
172
(.87) |
166
(.84) |
162
(.82) |
3.9W
(472W) |
2.8A
(339W) |
2.4A
(290W) |
120VAC,
60 Hz |
6601-22-H |
Login
|
220VAC,
60 Hz |
6601-22-H-220 |
Login
|
| Fan / Filter Unites with ULPA Filter |
| Model |
Dimensions
Inches
(mm) |
Wt.
Lbs.
(Kg) |
Avg.
CFM
@ MS
(m3/h) |
Airflow ft/min(m/s) |
Run Amps (Watts)
@ 60Hz |
Power |
With ULPA Filter |
| HS |
MS |
LS |
HS |
MS |
LS |
Cat. # |
$/Each |
| 2 x 4 |
23.63 x 47.63 x 12.51
(600 x 1210 x 318) |
71
(32) |
717
(1218) |
115
(.58) |
102
(.51) |
93
(.47) |
4.3A
(512W) |
3.5A
(416W) |
3.3A
(393W) |
120VAC,
60 Hz |
6601-24-U |
Login
|
220VAC,
60 Hz |
6601-24-U-220 |
Login
|
| 2 x 3 |
23.63 x 35.63 x 12.51
(600 x 905 x 318) |
53
(24) |
602
(1023) |
121
(.61) |
116
(.59) |
106
(.54) |
4.1A
(500W) |
3.1A
(378W) |
2.7A
(329W) |
120VAC,
60 Hz |
6601-23-U |
Login
|
220VAC,
60 Hz |
6601-23-U-220 |
Login
|
| 2 x 2 |
23.63 x 23.63 x 12.51
(600 x 600 x 318) |
44
(20) |
558
(948) |
172
(.87) |
166
(.84) |
162
(.82) |
3.9W
(472W) |
2.8A
(339W) |
2.4A
(290W) |
120VAC,
60 Hz |
6601-22-U |
Login
|
220VAC,
60 Hz |
6601-22-U-220 |
Login
|
| Terra FFU Replacement Filters |
| Type |
Filter Size
Feet
(mm) |
Cat. # |
$/Each |
| HEPA |
2 x 2
(610 x 610)
|
6601-27 |
Login
|
2 x 3
(610 x 914)
|
6601-26 |
Login
|
2 x 4
(610 x 1219)
|
6601-25 |
Login
|
| ULPA |
2 x 2
(610 x 610)
|
6601-30 |
Login
|
2 x 3
(610 x 914)
|
6601-29 |
Login
|
2 x 4
(610 x 1219)
|
6601-28 |
Login
|
|
|
Power Distribution Modules
View Power Configuration
Dramatically simplifies connection of ceiling lights and fan/filter modules (FFUs) and allows operation from a single Control Panel (no. 6600-23, order separately). Each accommodates up to 5 lights and 5 FFUs and includes a step-down transformer for low-voltage control and operation status indicator circuits. Includes relays and circuit breakers for overload protection of all connected devices, AC contactors, and NEC-compliant quick-connect fittings for lights and FFUs. Price includes installation on specified Terra cleanroom. Each module must be wired to a dedicated 35A fused 120VAC or 30A fused 240VAC circuit.
| |
Cat. # |
$/Each |
| 120V |
6600-29 |
Login
|
| 240V |
6600-29-220 |
Login
|
Power Distribution Modules, for use with EnergySaver FFU Control System
This 20-amp version of the model above is configured to allow FFU operation by the EnergySaver Control System. EnergySaver controllers allow remote speed adjustment of up to four FFUs attached to each PDM unit.
| |
Cat. # |
$/Each |
| 120V |
6600-29-ES |
Login
|
| 240V |
6600-29-ES-220 |
Login
|
Power Distribution Module,
Single Point of Connection
View Power Configuration
Similar to the unit above, but includes NEC electrical enclosure mounted to the side of the cleanroom that provides easy access to serviceable components, including circuit breakers. Electrical panel allows multiple Power Distribution Modules and all other cleanroom electrical equipment to be hard-wired to a single dedicated power source, reducing reliance on an electrical contractor to complete cleanroom installation.
| |
Cat. # |
$/Each |
| 120V |
6600-28 |
Login
|
| 240V |
6600-28-220 |
Login
|
|
|
 |
| Eliminates surface charges generated by laminar flow for a cleaner cleanroom |
IonBar™ Ionizing Bar with FFU Installation Kit
The IonBar™ generates a balanced stream of positive and negative ions to neutralize surface static charges, protecting sensitive parts against ESD and eliminating surface attractions that make cleaning difficult. Its low-voltage design is intrinsically safe and minimizes EMI/RFI. Includes installation kit for easy attachment to fan/filter units (order separately), which disseminate ions throughout the cleanroom.
For FFU Size
Fett,No. of emitters
(mm) |
For 120VAC,
60Hz |
For 220VAC,
50/60 Hz |
| Cat. # |
$/Each |
Cat. # |
$/Each |
2 x 4, 8
(610 x 1219) |
2005-49 |
Login
|
2005-49-220 |
Login
|
2 x 3, 6
(610 x 914) |
2005-48 |
Login
|
2005-48-220 |
Login
|
2 x 2, 4
(610 x 610) |
2005-47 |
Login
|
2005-47-220 |
Login
|
|
|
 |
Cleaner Than Clean!
Unique adapter (shown in yellow) draws air through carbon filters and/or UV sanitizing modules |
Adapter Housing for Carbon Filtration and UV Sanitation
This versatile adapter adds two important capabilities to the WhisperFlow™ Fan/Filter Unit:
Carbon Filtration removes solvent and other chemical vapors to ensure a safe, clean process environment. The adapter module accommodates two 6" (152 mm)-thick charcoal cartridges, which typically provide 15 to 24 months of effective vapor filtration, depending on concentration. Carbon filters restrict air flow; air velocity with dual filters installed typically falls to around 50 ft./min. with FFU on high speed.
UV Sanitizer kills most bacteria, viruses and molds to eliminate biological hazards inside the cleanroom. See efficacy data at TerraUniversal.com.
Select one adapter housing for each 2' x 4' (610 mm x 1219 mm) FFU, and two charcoal cartridges and/or sterilization modules per adapter housing. Adapter must be ordered together with Terra WhisperFlow™ FFU
| |
Cat. # |
$/Each |
| WhisperFlow™ Adapter |
6602-30 |
Login
|
| Charcoal Cartridge* |
6602-35 |
Login
|
| UV Sanitizing Module* |
6602-40 |
Login
|
| * Order two per FFU Adapter |
More sterilization solutions
|