Can't find what you're looking for?Tell us what you need and we'll build it!
Reusable Garments
- Gowning Procedures
Print Copy Copied
Choosing and Organizing Cleanroom Furniture to Meet Recommended Gowning Protocol
Manufacturers invest hundreds—even thousands—of dollars per square foot of cleanroom space to meet ISO-proscribed particle counts. Shouldn't the same standards be required of the people who enter and potentially contaminate this ultra-clean environment?
Proper cleanroom garments, including hoods, face masks, booties and gloves, help to contain particles that people emit. Yet improper gowning procedures can negate your investment in cleanliness and threaten yields of sensitive semiconductor devices. Once a garment is contaminated—violated by contact with a dirty surface—it spreads particles everywhere it goes.
You can train personnel on proper garmenting procedures, but how do you guarantee compliance? A violated garment doesn't set off alarms, and few facilities can afford quality control monitors to supervise every person through every washing and dressing stage. Yet if strict controls are not observed, dirty gloves and coveralls almost certainly will come in contact with clean operations.
An Organized Gowning Area that Supports Clean Protocol
The simplest and most economical approach to this dilemma is a correctly designed gowning area, complete with well-designed cleanroom furniture, that keeps personnel on a clean track.
This design starts with a room with pressure greater than that of the outside air, but lower than the cleanroom. This cascading pressure differential reduces the opportunity for contaminants to enter each controlled space. It includes a laminar flow of HEPA-filtered air, typically emitted through ceiling filter/fan units. This continuous wash of clean air immediately removes personnel-emitted contaminants, as well as particles present even in cleanroom-laundered garments (see Figure 1). Failure to maintain the desired particle standard in the change area will lead to contaminating clean garments.
| Activity | No. of particles (>= 0.3µm) |
|---|---|
| Person emits during garmenting process | 3,000,000/min. |
| Cleanest skin (hands) | 10,000,000/ft2 |
| Employee street clothes | 10,000,000 to 30,000,000/ft2 |
| Floor and bench surfaces | > 10,000,000/ft2 |
| Garments supplied by cleanroom laundry | 1,000,000/ ft2 |
| Figure 1: Gowning Area Particle Generators Source: Encyclopedia of Clean Rooms, Bio-Cleanrooms and Aseptic Areas, Dr. Philip Austin, P.E., 2000 | |
The Change Room illustration below depicts an effective floor plan that places the proper gowning stations in appropriate locations. Although many variations on this layout are possible, they should support these key garmenting guidelines:
- Don't Touch! Most cleanliness violations occur when a garment is touched by dirty hands, or when it touches a dirty floor. Hands and gloves should therefore be washed and dried frequently. Select washers and dryers with no-touch IR sensors to minimize the chance of violating gloves. Maintain ultraclean, unviolated surfaces where garments can be donned without contamination. Properly placed gowning benches or use of a special gowning platform helps maintain "not step" areas where a coverall may touch the ground during gowning.
- Dress from the Head Down! That way, released particles won't fall on clean garments or booties.
- Understand Garment Design! In most instances, gloves and booties are worn over coverall sleeves and cuffs, and hoods are tucked inside collars. Make sure that personnel are trained on how to seal these gaps between clothing, and include a mirror to allow final self-inspection. Hang a photo of a correctly garbed person next to the mirror as a "how-to" guide.
- Minimize Motion! As Figure 2 indicates, people wearing cleanroom garments emit thousands of particles per minute even when sitting still! People in street clothes, walking from one change room location to another, release millions of particles. Change room plans should therefore minimize motion, especially during the final stages of dressing, by efficiently organizing the flow of personnel from one station to another.
- Minimize Maintenance! Do you have dedicated, trained personnel to peel off adhesive shoe mats, wipe down gowning benches, keep "clean zones" regularly scrubbed, empty waste receptacles, restock garb dispensers, and perform other upkeep with the absolute regularity that your protocol requires? If not, look for ways to minimize reliance on humans—through automation, careful product positioning, choice of materials, and so forth. Initial cost may be higher, but reduced maintenance and greater compliance provide a rich return on your investment!
- Train and Reinforce! A good change room design supports proper protocol, but it doesn't teach it. Make sure that personnel complete a formal training program, and stress protocol by hanging reminder posters at every gowning station that reinforce proper procedures.
| Personnel Activity | Snap Smock | Standard Coverall | 2-Piece Coverall | Tyvek® Coverall | Membrane Coverall |
|---|---|---|---|---|---|
| No Movement | 100,000 | 10,000 | 4,000 | 1,000 | 10 |
| Light Movement | 500,000 | 50,000 | 20,000 | 5,000 | 50 |
| Heavy Movement | 1,000,000 | 100,000 | 40,000 | 10,000 | 100 |
| Change Position | 2,500,000 | 250,000 | 100,000 | 25,000 | 250 |
| Slow Walk | 5,000,000 | 500,000 | 200,000 | 50,000 | 500 |
| Fast Walk | 10,000,000 | 1,000,000 | 400,000 | 100,000 | 1,000 |
| Figure 2: Austin Contamination Index Particles >= 0.3µm emitted per minute in garment indicated Source: Encyclopedia of Clean Rooms, Bio-Cleanrooms and Aseptic Areas, Dr. Philip Austin, PE, 2000 Note: Light/heavy movement refer to partial body movements (motioning with arm, tapping toes, etc.). Change of position refers to whole body motion (standing up, sitting down, etc.). | |||||
Recommended Gowning Room Design
Recommended Cleanroom Furniture
- Secure lockers for clothing and personal property
- Shoe cleaner, with rotating brushes to remove gross contaminants
- Walk-off adhesive Sticky mat
- Air Shower, with HEPA filtered air jets to remove loose contaminants
- Hand washing station, no-touch operation
- Hand dryer (if not incorporated into washer), HEPA/ULPA-filtered air, no touch
- Glove dispenser for glove liner or underglove
- Glove washing/drying station (if gloves not clean)
- Glove washing/drying station (if gloves not clean)
- Headwear dispenser
- Face mask dispenser
- Waste receptacle—should be installed wherever packaging is removed
- Garment Storage Facility—depends on garment type
- Open garment rack for reusable garments
- Enclosed garment cabinet for reusable garments (includes HEPA blower)
- Garment storage shelves for packaged disposable garments, Overstock Cabinet
- Cleanroom table for organization
- Waste receptacle
- Ergonomic lean rails support personnel while donning coveralls
- Gowning platform provides a noncontaminated surface to prevent violation of garment
- Wiper dispenser—used to clean bench prior to putting on booties
- Bootie rack and shoe cover dispenser (may also be incorporated into benches)
- Waste Receptacle
- Gowning benches, used when putting on booties. Booties stay on "clean" side
- Cleanroom mirror for final self-inspection (side-by-side w/poster showing correctly garbed model)
- Safety glass dispenser and overglove dispensers
- Air shower—may be required in cleanroom entrance
- Garment hamper for reusable garments to be laundered
- Waste receptacle for disposable garments
-
ESD-Safe Cleanroom Tool Belt by Uniform TechnologyStockedGroup of 3 products4954-PP-04 72154FromAs low as $50Some ship in 5 - 7 daysISO 6 Icon
Stocked
Ships Free
1 Type1 Material1 Certified ISO Grade™ Design1 Color3 Size1 StyleType: Cleanroom/ESDMaterial: Altessa GridCertified ISO Grade™ Design: ISO 6Color: WhiteSize: 49", 54", 59"Style: Tool Belt -
Reusable Cleanroom Coveralls by Uniform TechnologyStockedGroup of 18 products4953-PP-01 72149FromAs low as $43Some ship in 5 - 7 daysISO 6 IconStockedShips Free1 Type2 Material1 Certified ISO Grade™ Design2 Color6 Size1 StyleType: Cleanroom/ESDMaterial: Altessa Grid, Maxima ESDCertified ISO Grade™ Design: ISO 6Color: White, Navy BlueSize: XS, S, M, L, XL, 2XLStyle: Coverall -
Cleanroom and Laboratory Coats by Uniform TechnologyStockedGroup of 36 products4954-PP-01 72151FromAs low as $35Some ship in 5 - 7 daysISO 6 IconStockedShips Free1 Type1 Material1 Certified ISO Grade™ Design4 Color6 Size2 StyleType: Laboratory/ESDMaterial: NylostatCertified ISO Grade™ Design: ISO 6Color: White, Blue, Gray, Light BlueSize: XS, S, M, L, XL, 2XLStyle: Long Lab Coat, Short Lab Coat -
Maxima® ESD Cleanroom Boots by Uniform TechnologyStockedGroup of 6 products4953-PP-04 72155FromAs low as $29Some ship in 5 - 7 daysISO 6 IconStockedShips Free1 Type1 Material1 Certified ISO Grade™ Design1 Color6 Size1 Style1 Manufacturer SKUType: Cleanroom/ESDMaterial: Maxima ESDCertified ISO Grade™ Design: ISO 6Color: WhiteSize: XS, S, M, L, XL, 2XLStyle: BootManufacturer SKU: CB2-68WH-S -
Taffeta Cleanroom Frocks by Uniform TechnologyStockedGroup of 12 products4953-PP-02 72150FromAs low as $21Some ship in 5 - 7 daysISO 6 IconStockedShips Free1 Type1 Material1 Certified ISO Grade™ Design2 Color6 Size1 StyleType: CleanroomMaterial: TaffetaCertified ISO Grade™ Design: ISO 6Color: White, Light BlueSize: XS, S, M, L, XL, 2XLStyle: Frock -
Cleanroom Sitewear Garments by Uniform TechnologyStockedGroup of 12 products4954-PP-02 72152FromAs low as $16Some ship in 5 - 7 daysISO 6 IconStockedShips Free1 Type1 Material1 Certified ISO Grade™ Design1 Color6 Size2 StyleType: SitewearMaterial: MicrodenierCertified ISO Grade™ Design: ISO 6Color: Navy BlueSize: XS, S, M, L, XL, 2XLStyle: Pants, Shirt -
Cleanroom Compliant Hoods by Uniform TechnologyStockedGroup of 18 products4954-PP-03 72153FromAs low as $14Some ship in 5 - 7 daysISO 6 IconStockedShips Free1 Type2 Material1 Certified ISO Grade™ Design2 Color6 Size1 StyleType: Cleanroom/ESDMaterial: Altessa Grid, Maxima ESDCertified ISO Grade™ Design: ISO 6Color: White, Navy BlueSize: XS, S, M, L, XL, 2XLStyle: Hood -
Laboratory Shoe Covers by Uniform TechnologyStockedGroup of 8 products4953-PP-05 73091FromAs low as $13Some ship in 5 - 7 daysISO 7 Icon
StockedShips Free1 Type1 Material1 Certified ISO Grade™ Design2 Color4 Size1 StyleType: CleanroomMaterial: TaffetaCertified ISO Grade™ Design: ISO 7Color: White, Light BlueSize: S, M, L, XLStyle: Shoe Cover -
Cleanroom and Laboratory Bouffants by Uniform TechnologyStockedGroup of 4 products4953-PP-03 73090FromAs low as $5Some ship in 5 - 7 daysISO 7 IconStockedShips Free2 Type2 Material1 Certified ISO Grade™ Design2 Color1 Size1 StyleType: Cleanroom/ESD, CleanroomMaterial: Altessa Grid, TaffetaCertified ISO Grade™ Design: ISO 7Color: White, Light BlueSize: One Size Fits AllStyle: Bouffant -
Face Mask; One Size Fits All, Chemstat, White, Uniform Technology (4954-99)Stocked Ships Free$13Usually ships in 5 - 7 daysStockedISO 7 IconShips Free -
Cleanroom Carry Bag, Altessa Grid, White, 20.5" W x 21" H, Uniform Technology (4954-70A)Stocked Ships Free$26Usually ships in 5 - 7 daysISO 8 Icon
StockedShips Free
Filter Products
See Product(s)
Reusable Garments
ISO 5The product design and materials are recommended for use inside an ISO 5 environment based on Terra's ISO Grade™ criteria.
ISO 6The product design and materials are recommended for use inside an ISO 6 environment based on Terra's ISO Grade™ criteria.
ISO 7The product design and materials are recommended for use inside an ISO 7 environment based on Terra's ISO Grade™ criteria.
ISO 8The product design and materials are recommended for use inside an ISO 8 environment based on Terra's ISO Grade™ criteria.
Features and Benefits
Cleanroom Modesty Garments: Pants
Unisex Cleanroom Modesty Pants, designed to be worn under cleanroom coveralls or lab coats.
Reusable Cleanroom Coats and Frocks
Cleanroom coats and frocks made of ESD-safe polyester Grid and economical, fluid-resistant polyester taffeta are comfortable and long wearing, ideal for lab and medical use.
Fluid-Resistant, Static-Safe Maxima Cleanroom Coveralls
Fluid-resistant Maxima ESD coveralls are ideal for pharmaceutical, medical, healthcare use; ESD Grid designs available for micro/electronics cleanrooms
Long-Wearing Cleanroom Boots and Shoe Covers
Cleanroom boots with anti-static sole meet strict cleanroom standards (shown: B-Fore reusable boot with molded Stella sole); durable-sole reusable shoe covers also available.
Bouffants Caps and Other Apparel
Reusable polyester taffeta bouffant snood caps and other garb meet the strictest cleanroom standards
Reusable Cleanroom Hoods
Pullover cleanroom hoods in several ESD-safe materials, include Grid polyester, shown, with and without sewn-in face cover
Reusable Garments
Gowning Procedures- Polyester Taffeta Garments
- Reusable Maxima ESD Cleanroom Coverall
Gowning Procedures Proper gowning protocol supports compliance with cleanliness standards. We explain and demonstrate these recommendations.
Polyester taffeta fabric provides contamination control and fluid resistance; ideal for food, pharmaceutical and medical/healthcare use Polyester Taffeta Garments Polyester taffeta fabric provides contamination control and fluid resistance; ideal for food, pharmaceutical and medical/healthcare use (shown: frocks and hair nets).
Fluid-resistant Maxima ESD cleanroom coveralls: ISO-5 clean, static safe and fluid resistant | 4953-36 displayed Reusable Maxima ESD Cleanroom Coverall Fluid-resistant Maxima ESD cleanroom coveralls: ISO-5 clean, static safe and fluid resistant for pharmaceutical, food, and medical/healthcare use; Grid coveralls ideal for semiconductor/electonics use.
