1. Home
  2. Laminar Flow Hoods, Fume Hoods, Biosafety Cabinets
  3. Ductless Exhaust Hoods
  4. Protector Downdraft Powder Stations

Protector® Downdraft Powder Stations
by Labconco

zprodtector Downdraft Powder Stations

Connect multiple hoods with #3413300 Transition Connectors to extend width; well-suited in forensic labs

Ideal for forensic applications, Protector Downdraft Powder Stations have an open design and units can be connected to extend the width of the working surface. Models keep operators safe during evidence processing by containing fingerprint powders with a quiet and energy efficient built-in motor that blows air down and horizontally exhausts HEPA filtered air through the back of the unit.
  • 2 ft. and 3 ft. width models
  • Open-sided, open-top design for unrestricted operator movement
  • Multiple units can be placed side-by-side to accommodate oversized evidence
  • Removable powder catch pan
  • Includes built-in blower with motorized, backward curved fan and 6" power cord with plug
  • Alarm light alerts operator of low airflow conditions
  • Exhaust prefilter of pleated paper with MERV 8 rating
  • Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron
  • Stainless steel surface lifts up to access and clean fine powders from pan located below
  • ETL listed
  • Optional: Transition Connector (mounts between hoods)
  • One-Year Manufacturer Warranty
cleanliness high
Ordering Information
Protector Downdraft Powder Stations, 115V
Labconco Part # Nominal Width Dimensions, in. (mm) Cat. # Price
3410000 2 feet 24W x 25.7 D x 18.75H (609.6 x 652.78 x 476.25) 1538-46 $ 2,415
3410001 3 feet 36W x 25.7D x 18.75H (914.44 x 652.78 x 476.25) 1538-47 $ 2,940

Labconco Part # Description Cat. # Price
3413300 Transition Connector 3648-00 $ 65
3768903 Replacement Prefilter 9082-10 $ 36
8075000 Variable Height Bench 1524-40 $ 1,331
air flow diagram

Protector Downdraft Powder Stations effectively contain powders during fingerprint processing and the optional Transition Connector (#3413300) connects multiple units to create a continuous work surface ideal for accommodating oversized evidence. The top shelf conveniently holds fingerprint powder, brushes, small instruments and supplies. Work surface and pan are easy to detach making these units not only easy to clean, but easy to transport making them ideal for use in remote locations.

Airflow Movement
The quiet built-in blower pulls room air down through the Flow-Zonetrade (perforations in the work surface) and then horizontally draws back the air through the back wall. The air is then HEPA filtered and discharged out the top rear of the enclosure. This dual zone air flow movement optimizes containment. The process is performed by a quiet and energy efficient motorized backward curved fan. Energy savings is achieved because air is recirculated and eliminates the need for cooling or heating the air exhausted from the building.

File Type File Name Publication Date
White Paper (PDF) Chemical Guide for Carbon Filtered Enclosures
Provides chemical specific data to assist in determining the suitability of ductless filtration for your application. Includes safety precautions when working with vaporous chemicals.
Click to leave a message. 24-hour sales and tech phone support, M - F
Call a Terra Hood specialist direct
Hours: 5:30 - 17:30 M-F
(your local time)
Go to...
Go To