714-578-6100
M-F, 5:30am - 5:30pm, L.A. Time

Series 100: Plastic Glove Box Isolators

Series 100 Polymer Glove Box Isolators  
Features Key
  Standard
  Option

A NitroWatch RH Control System
B Dual Purge Nitrogen Purge Controller
C Universal air lock (other designs available)
D Changeable sleeve and glove combination
E Powder-Coated Stand
F Caster set (two with locking brakes)
  Choice of plastics include dissipative PVC and acrylic
  Options include ionizing module, fluorescent illuminator, UV light, tilt-up viewing window

 

Buy now logo
Click any price
to add to cart.
Blue Prices show
stock on hand.

More . . .

 


  • An economical controlled processing environment for a wide range of manufacturing and testing operations
  • Dual-gasketed side doors and a fully gasketed back permit introduction of small and large equipment
  • Optional gas purge controls automatically
    • establish a Class 1 particle-free environment
    • maintain a humidity set point down to 0% RH
    • minimize system recovery time
  • Arm ports accept a wide variety of gloves, including Terra's accordion sleeve and glove assembly
  • Select single model (with two glove ports) or twin model (with four glove ports)
  • Available in five materials: acrylic, static-dissipative PVC, nondissipative PVC, polypropylene and polycarbonate
  • System options include blower/filter module (for recirculating/purifying exhaust), ionizing equipment (for complete static protection), external fluorescent light or internally-mounted UV light
  • Other designs available

How to Order:
1. Select the glove box of the desired size (single or twin) and material from the ordering table below
2. Select the Air Lock for your application. The Standard or Pass-Through Air Lock is for connection to one glove box; Universal Air Lock allows connection of two glove boxes in series. Right-side mounting is standard.
3. Select the appropriate accessories for your system; all prices include installation. Other optional accessories are listed below.
OR — Use the QuickQuote tool to help you select the glovebox for your application QuickQuote
Series 100 Polymer Glove Box Isolators dimension illustration Custome Design
Single Model (2 Arm Ports) Twin Model (4 Arm Ports)    
Type A
in.
(mm)
D
in.
(mm)
F
in.
(mm)
H
in.
(mm)
I
in.
(mm)
M
in.
(mm)
N
in.
(mm)
Single 16.75
(425)
24
(610)
35
(889)
25
(635)
10.5
(267)
10
(254)
14
(356)
Twin 16.75
(425)
24
(610)
59
(1499)
25
(635)
10.5
(267)
10
(254)
14
(356)
Buy now logo
Click any price
to add to cart.
Blue Prices show
stock on hand.

More . . .
Type Series 100 Plastic Glove Boxes*
QuickQuote
See Dimensions above
Acrylic* Static Dissipative PVC** Nondissipatie PVC
Cat.# Price Cat.# Price Cat.# Price
Single Models (2 glove ports) 1689-00G Price 3305-00F Price 3305-03F Price
Twin Models (4 glove ports) 1689-16G Price 3305-10F Price 3305-11F Price
*Acrylic is damaged by alcohol and other cleaning agents.

Type Series 100 Plastic Glove Boxes*
QuickQuote
See Dimensions above
Polypropylene
(Dissipative PVC***
viewing window)
Polycarbonate Stainless Steel Work Surface
(prevents scratching)
Cat.# Price Cat.# Price Cat.# Price
Single Models (2 glove ports) 1681-29F *** Price 1681-31F Price 1689-11 Price
Twin Models (4 glove ports) 1681-30F *** Price 1681-32F Price 1681-33 Price
* Complete with 0.125" NPT inlet and 0.25" NPT outlet.
** Includes grounding terminals. The Stainless Steel Work Surface is required with the Static-Dissipative PVC glove box to prevent scratching.
*** Includes 110VAC, 50/60Hz fluorescent illuminator (for 220VAC/50Hz add -220 to the part number).

Series 100 Polymer Glove Box Isolators  door gasket Series 100 Polymer Glove Box Isolators  door gasket illustration
Series 100 Polymer Glove Box Isolators  door gasket detail
One-piece design with fused corners eliminates leaks
Stainless steel door frames with unique "e" profile elastomer gasket increase structural rigidity, extend service life, improve sealing performance

Polypropylene Series 100 Polymer Glove Box Isolators
Polypropylene Glove Box No. 1681-29F

RH/Temperature Data Logger
RH/Temperature Data Logger for glove box Provides a convenient record of storage conditions! Placed in a desiccator or glovebox, this compact device accumulates humidity and temperature data at specified intervals for hours, days, weeks, even months. USB connection lets you import and display data in several formats.
Cat. # Price
9500-10 Price

Glove Box Client List
Dozens of customers for
Terra Glove Boxes

Terra's Series 100 Polymer Glove Box Isolators provide a clean, low-humidity environment for critical processing operations in such industries as semiconductor and pharmaceutical manufacturing. Their modular design lets you select the options you need for your application.

Versatile Glove Boxes for Every Industry

Select from a variety of materials to suit your requirements. Economical acrylic is ideal for general purpose processing. Transparent Static-Dissipative PVC helps eliminate static charges and the particles they attract, keeping your glove box clean inside and out. Nondissipative PVC is ideal for operations with many corrosive chemicals, and polypropylene offers even greater chemical resistance (polypropylene glove boxes feature a transparent Static-Dissipative PVC viewing window). Select polycarbonate for operations that involve thermal stress.

All glove boxes are fabricated to meet the most rigorous standards for cleanliness and durability. For all materials except polypropylene (which uses fasteners), solvent welding ensures a strong, noncontaminating structure. The 45° front slope allows the operator an uninterrupted overview of work in progress.

Improved Access Doors Reduce Wear, Enhance Performance
Dual side access doors open inward to allow easy parts transfer from inside the chamber. Doors feature stainless steel reinforcement frames that increase the structural rigidity of the door by a factor of five. A built-in LiftLatch™ securely seals the door without applying lateral torque that could damage hinges.

All doors include a unique, one-piece "e"-profile elastomer gasket that will not compress or migrate over time. Its superb sealing capability saves nitrogen, eliminates maintenance, and extends the service life of access doors—typically the only component of a glove box that shows wear.

Air Locks Allow Convenient Access
These glove boxes can be outfitted with air locks that maintain the integrity of the controlled environment without sacrificing convenience.

Standard and pass-through air locks mount on the right side of the chamber (left-mounting air locks are available on a custom basis). They minimize nitrogen loss and contamination inflow while parts are introduced or removed. Universal Air Locks extend system flexibility by mounting to either the right or left side of the chamber; their double flange design allows several chambers to be connected in series. All air locks include a 0.125" NPT pipe-tapped opening for connection of purge gas and a 0.25" NPT outlet to accommodate an Automatic RB® (Relief/Bleed) Valve.

For applications involving large equipment, you can simply remove and then reinstall the fully gasketed back wall. Dual 10" round arm ports come equipped with flanges for easy connection to Terra's many gloves, including the accordion-type glove assemblies.

Nitrogen Controls Ensure Low-Humidity, Contamination-Free Atmosphere
For optimal processing conditions, select Terra's Glove Box Dual Purge™ System and NitroWatch®, which work in tandem to provide completely automatic gas purging.

The Dual Purge System delivers a variable nitrogen purge into the glove box. During normal operation, it provides a continuous low-flow purge to maintain a positive pressure that blocks out contaminants. In the event of a sudden pressure drop, it activates a high-flow purge to block out contaminants and to quickly purge any moisture or contaminants that do enter the chamber.

The NitroWatch provides automatic low-humidity control. It monitors the internal relative humidity and activates the high-flow purge when the moisture climbs above an adjustable set point. The Automatic RB(Relief/Bleed) Valve provides safe pressure relief with these control systems and also functions as a check valve, ensuring that no moisture or contaminants enter the chamber in the event of a negative pressure. All glove boxes feature a tapped 0.125" NPT inlet and a 0.25" NPT outlet for connection to these controls.

Select the single or twin model; twin glove boxes feature two pairs of glove ports to accommodate two operators (order gloves separately). Other system options include a filter/blower module for filtering and recirculating purge gas or purifying exhaust; self-balancing ionizing equipment for complete static safety; an externally mounted fluorescent light for enhanced viewing (which is especially important in the polypropylene glove box) or an internally-mounted UV light.

Note: These glove boxes are not designed for use under vacuum. Select Terra's Negative Pressure Glove Boxes for low-level vacuum applications

Specifications
Door Openings: 10" x 10" (254 mm x 254 mm) with gasketed doors, on both sides of chamber; doors open inward.
Arm Ports: 10" (254 mm) round with flange for connecting glove assembly
Gas Ports: Tapped 0.125" NPT inlet (for connecting flowmeter or Dual Purge System) and 0.125" NPT system pressure port; 0.25" NPT outlet

Air Locks (see ordering charts below)
standard glove box isolator air lock  
Standard Air Lock
These air locks mount on the right side of the glove box to allow easy pass-through of parts into and out of the chamber. They feature a swing-down door on the front (outside) and a second door that is easy to open by a gloved hand from inside the glove box. One-piece nonadhesive gasket enhances sealing performance and extends service life. Capped ports are provided to allow purging of the air lock with nitrogen. Right mounting is standard.
     
glovebox isolator pass-through air lock  
Pass-Through Air Lock
Feature electropolished 304 stainless steel racks that accommodate adjustable shelves. Their in-line double-door construction lets you pass small parts easily into the glove box; you simply slide a shelf through the outside door to load parts and then through the inside door to unload them in the chamber.
Order shelves separately. Right mounting is standard.
Shelves Cat. # Price
Acrylic 1680-67 Price
Stainless Steel 1680-68 Price
     
glove box isolator universal air lock  
Universal Air Lock
The Universal Air Lock features dual flanges (each with gaskets) to permit mounting on either the right or left side of any Terra plastic glove box. They also allow multiple glove boxes to be connected in series. Each air lock includes a capped 0.125" NPT inlet connection for purge gas and a fitting for a plastic Automatic RB® Valve. Select material compatible with your glove box(es). Right mounting is standard. Purchase Automatic RB® Valve separately.
 
Stainless steel frames now standard on all access doors.
Type Right Mount Series 100 Air Locks
(each includes ports for nitrogen purging/bleeding)
See
Descriptions
above
Acrylic Static Dissipative PVC Nondissipative PVC
Right Mount Right Mount Right Mount
Cat.# Price Cat.# Price Cat.# Price
Standard Air Lock 1680-78B Price 1680-81B Price 1680-84B Price
Pass-Through Air Lock 1680-79B Price 1680-82B Price 1680-85B Price
Universal Air Lock 1680-80B Price 1680-83B Price 1680-86B Price
Type Left Mount Series 100 Air Locks
(each includes ports for nitrogen purging/bleeding)
See
Descriptions
above
Acrylic Static Dissipative PVC Nondissipative PVC
Left Mount Left Mount Left Mount
Cat.# Price Cat.# Price Cat.# Price
Standard Air Lock 1702-55B Price 1702-57B Price 1702-59B Price
Pass-Through Air Lock 1702-56B Price 1702-58B Price 1702-60B Price
Universal Air Lock 1680-80B Price 1680-83B Price 1680-86B Price
Type Right Mount Series 100 Air Locks
(each includes ports for nitrogen purging/bleeding)
See
Descriptions
above
Polypropylene
(Dissipative PVC viewing window)
Polycarbonate
Right Mount Right Mount
Cat.# Price Cat.# Price
Standard Air Lock 1680-87B Price 1680-90B Price
Pass-Through Air Lock 1680-88B Price 1680-91B Price
Universal Air Lock 1680-89B Price 1680-92B Price
Type Left Mount Series 100 Air Locks
(each includes ports for nitrogen purging/bleeding)
See
Descriptions
above
Polypropylene
(Dissipative PVC viewing window)
Polycarbonate
Left Mount Left Mount
Cat.# Price Cat.# Price
Standard Air Lock 1702-61B Price 1702-63B Price
Pass-Through Air Lock 1702-62B Price 1702-64B Price
Universal Air Lock 1680-89B Price 1680-92B Price
Stainless Steel Work Surface
(prevents scratching)
Cat.# Price
1680-69 Price

Glove and Sleeve Combinations

Bonded Sleeve and Glove Combination

 

  Bonded Sleeve and Glove Combination
For optimal economy and long-term durability, this combination features gloves that are permanently vulcanized to sleeves. The sleeves are made of heavy-duty, chemical-resistant neoprene and are designed for 10" (254 mm) port size. Hands are also made of sturdy neoprene; select desired size. Clamps included. 8" (203 mm) Port Size Available
Bonded Sleeve and Glove Combination for 10" (254 mm)  ports
Glove Size Cat. # Price
8 1689-53 Price
9 1689-55 Price
10 1689-56 Price
     
Changeable Sleeve and Glove Combination   Changeable Sleeve and Glove Combination
These accordion sleeves can be used with a variety of gloves, allowing you to change glove size or type without changing the sleeve itself. The convoluted section keeps the sleeve off the operator's arm for better air circulation and greater comfort. Supplied with one pair of nitrile industrial gloves (select desired size). Clamps included.
Changeable Sleeve and Glove Combination
Glove Size With 18" (457 mm) Sleeve
Cat. # Price
8 1689-46 Price
9 1689-47 Price
10 1689-48 Price

Corresponding Options
Fluorescent Illuminator*
Type Cat.# Price
Single 1681-78 Price
Twin 1681-79 Price
* Comes standard on polypropylene models. Add "220" for 220VAC models.
Ionizing Blower*
More Info
110VAC, 50/60Hz 220VAC, 50Hz
Cat. # Price Cat. # Price
22"L (559 mm)
with 4 emitters
2005-30 Price 2005-30-220 Price
33"L (838 mm)
with 6 emitters
2005-32 Price 2005-32-220 Price
44"L (1118 mm)
with 8 emitters
2005-31 Price 2005-31-220 Price
* Requires Transformer and power strip. Models indicated are 120VAC, 60Hz.
Additional Options
Power Strip* Dual Purge System NitroWatch
Controller
NitroWatch Sensor Automatic
RB Valve
Operating
Manual
Cat# Price Cat# Price Cat# Price Cat# Price Cat# Price Cat# Price
1681-80 Price 1603-57 Price 9500-00A Price 9500-02A Price 1600-60A Price 1800-42 Price
* Mounted horizontally on the inside rear wall, 3"  (76 mm) from the bottom (specify other position, if desired). Includes master on/off switch, 15-Amp circuit breaker and 4 outlets.
 

Series 100 Glove Box Isolator Accessories

Stands for Series 100 Glove Box Isolators

Constructed of all-welded 1.5" (38 mm) square tubing, these stands are specially designed to support Series 100 glove boxes. Select powder-coated (white) steel or stainless steel stands, with or without hard rubber casters.

For Single Models
35"W x 24"D x 30"H (889 mm x 610 mm x 762 mm)

  Cat. # Price
Powder-Coated Steel Stand 1681-48 Price
Stainless Steel Stand 1681-49 Price

For Twin Models
59"W x 24"D x 30"H (1499 mm x 610 mm x 762 mm)
  Cat. # Price
Powder-Coated Steel Stand 1681-51 Price
Stainless Steel Stand 1681-52 Price

Casters (set of 4, 2 with brakes)
Cat. # Price
1700-44 Price

Universal Filter/Blower Universal Filter/Blower
This positive pressure system, designed for use on Series 100 Glove Boxes, directs a flow of particle-free air into the glove box. Select HEPA or ULPA filter. Note: Gloves must be removed to allow air to escape the enclosure.
  Cat. # Price
Blower (740 CFM, 1258 m³/hr, stainless steel) 110V 1685-97 Price
Blower (740 CFM, 1258 m³/hr, stainless steel) 220V 1685-97-220 Price
Filter Housing (stainless steel) 1685-98 Price
HEPA Filter 1681-02 Price
ULPA Filter 1681-10 Price

Double-Wall Construction with Temperature Control

Double-Wall Construction with Temperature Control
Double-wall polycarbonate and stainless steel glove boxes feature up to 4" (102 mm) of polyurethane insulation for energy efficiency at process temperatures between 120°F and -40°F (49°C and -40°C). Call Terra to discuss your application!


Filtration Modules Filtration Modules
These modules allow continuous recirculation of process gas through a HEPA or ULPA filter to remove particles, aerosols, microbes, chemical powders, and other fine contaminants. A variety of open/closed-loop configurations allow 100% exhaust, 100% recirculation, or a mixture of filtered and fresh make-up air.

Detachable Bottom
Allows Series 100 glove box to be lifted for easy placement over large equipment. Bottom attaches and seals to glove box by means of dual-gasketed latches located along the base.
Cat. # Price
1681-55 Price

Tilt-Up Viewing Window Tilt-Up Viewing Window Swings open for easy access. Dual piston mechanisms hold the window securely open. Price includes modification of Series 100 glove box to include hinged viewing window. Must be ordered tpgether with affected glovebox.
For Series 100 Gloveboxes
Static Dissipative PVC Cat# Price

With Stainless Steel Frame
For single chamber
35"W x 12.5"H
889 mm x 318 mm
3305-20 Price
For twin chamber
59"W x 11"H
1499 mm x 318 mm
3305-21 Price
With Powder-coat frame
For single chamber
35"W x 12.5"H
889 mm x 318 mm
3305-22 Price
For twin chamber
59"W x 11"H
1499 mm x 318 mm
3305-23 Price

Fixed Rear Wall
A fixed rear wall can be specified in place of the removable rear wall furnished standard with Series 100 glove boxes.
Cat. # Price
1681-58 Price

File Type File Name Publication Date
Manual (PDF) Plastic Glove Boxes (Series 100): Doc. Number 1800-42
Operating and Maintenance manual for Series 100 plastic glove boxes, as well as Dual Purge and NitroWatch humidity controllers.
03/06/2014
Click to leave a message. 24-hour sales and tech phone support, M - F