1. Home
  2. Chairs & Stools
  3. Dauphin Cleanroom Chairs
  4. Class 100 ESD-Control Chairs

Class 100 ESD-Control Chairs by Dauphin

Cleanroom ESD Chair
No. 1013-52
  • Vinyl material and ultra-clean construction make this chair suitable for use in a Class 100 environment
  • Static-safe fabric helps protect sensitive components and equipment
  • Ergonomic design features four adjustable functions to ensure comfort, safety
  • Built to stand up to long, rugged use
  • Standard surface resistivity between 10^5 and 10^6 Ohm.

These chairs offer the static protection of the ESD chair, but add particle-control features for use in a cleanroom environment.

Proven Cleanroom Performance
Both the bottom and back shell are completely enclosed to inhibit particle generation, and the carbon-impregnated vinyl fabric combines cleanliness with static-protection.

In fact, tests conducted by an independent laboratory in accordance with Federal Standard 209 demonstrated that particles generated by the chair remained under the Class 100 limit (100 particles 0.5 µm or larger per cubic foot) even when heavy work was simulated.*

Four Continuous-Comfort Ergonomic Functions
Both the contoured seat and back are covered with 2.5" (64 mm) of urethane foam to ensure comfortable seating (meets California Code 117). In addition, these chairs feature four adjustable ergonomic functions:

The 5-leg base is 26" (660 mm) diameter and is made of cast aluminum with a polished top. The 2" (51 mm) diameter dual-wheel, anti-static casters are particularly well suited for hard floors. Their design allows easy movement but slows down backward rolling when you stand up—an important safety feature.

Tests have shown that the casters maintained their static-dissipative characteristics after the equivalent of five years of continuous heavy use.* By placing these chairs on any grounded floor mat, you can rest assured that static charges generated by an operator will be safely dissipated before they can do any damage.

Standard vinyl color is black.

Cleanroom ESD Chair
Inches (mm)

Cat. # Price
16 - 21
(406 - 533), no footring
1013-50 $ 531
19 - 26
(483-660), with adjust. footring
1013-51 $ 607
(584-813), with adjust. footring
1013-52 $ 562
ESD Chair Automatic Backrest Flexibility:
Your backrest flexes as you move.
Chair Height Adjustment:
Gives you fingertip control of the chair height.
ESD Chair Backrest Height:
Lets you raise and lower the backrest while you are seated. Features built-in lumbar support.
Seat: 19" x 17.5" (483 mm x 445 mm)
Back: 15.5" x 13.5" (394 mm x 343 mm)
Seat Height: See below
Overall Width: 19" (483 mm)
Overall Depth: 25" (635 mm)
Weight: lbs. (kg)
27 - 34 (12.2-15.4)
* These are typical test results, not guaranteed values.
Click to leave a message. 24-hour sales and tech phone support, M - F
Call a Terra Chairs specialist direct
Hours: 5:30 - 17:30 M-F
(your local time)
Go to...
Go To