FREE CONSULTATION714-578-6100
  1. Home
  2. Storage & Shelves
  3. Storage Cabinets
  4. Curing/Drying Cabinet

Curing/Drying Cabinet

Curing/Drying Cabinet
No. 6082-35A Inlet HEPA filtration,
outlet chemical vapor filtration.
  • Provides continuous wash of filtered air (HEPA or ULPA) for clean, controlled adhesive curing, PC board drying, and parts storage
  • Exhaust purification system removes odors and chemical vapors from air-stream for safe indoor release
  • 304 Stainless steel shelves can be adjusted on racks to accommodate various part sizes
  • Select static-dissipative PVC storage cabinets for maximum static and particle control
  • FM 4910 fire-rated plastic available; call for information

This versatile cabinet is ideal for drying PC boards after epoxy coating or solvent cleaning, as well as in other applications requiring a high-volume wash of particle-free air to dry and clean sensitive materials.


For Particle Protection
(Inlet and Outlet Filtration)

Curing/Drying Cabinet

Curing/Drying Cabinet

  Stainless Steel Stands
3 or 6 Chambers 5 or 10 Chambers   Hardware Clearances
(add to nominal dimensions)
Drying/Curing Cabinets: Inlet Filter/Blower and Exhaust Filter
(Order desired filter(s) separately, below)
All dimensions exclude hardware.
No. of
Chambers
Overall
Dimensions
(excluding hardware)
Chamber
Dimensions
(excluding hardware)
Acrylic*
110VAC, 50/60Hz 220VAC, 50Hz
W" x D" x H" (mm) W" x D" x H" (mm) Cat. # Price Cat. # Price
31 37.375 x 24 x 36
(949 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-16A Price 6082-20A Price
61 64.35 x 24 x 36
(1634 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-17A Price 6082-21A Price
52 37.375 x 24 x 60
(949 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-18A Price 6082-22A Price
102 64.35 x 24 x 60
(1634 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-19A Price 6082-23A Price
Drying/Curing Cabinets: Inlet Filter/Blower and Exhaust Filter
(Order desired filter(s) separately, below)
All dimensions exclude hardware.
No. of
Chambers
Overall
Dimensions
(excluding hardware)
Chamber
Dimensions
(excluding hardware)
Static-Dissipative PVC
110VAC, 50/60Hz 220VAC, 50Hz
W" x D" x H" (mm) W" x D" x H" (mm) Cat. # Price Cat. # Price
31 37.375 x 24 x 36
(949 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-24A Price 6082-28A Price
61 64.35 x 24 x 36
(1634 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-25A Price 6082-29A Price
52 37.375 x 24 x 60
(949 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-26A Price 6082-30A Price
102 64.35 x 24 x 60
(1634 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-27A Price 6082-31A Price
1 Includes inlet filter housing with one 740 CFM (1258 m³/hr) blower and outlet (exhaust) housing for one filter (order filters separately)
2 Includes inlet filter housing with two 740 CFM (1258 m³/hr) blowers and outlet (exhaust) housing for two filters (order filters separately)

*Acrylic is damaged by alcohol and other cleaning agents.

For Particle and Chemical Vapor Protection
(Inlet and Outlet Filtration)

Curing/Drying Cabinet

Curing/Drying Cabinet

  Stainless Steel Stands
3 or 6 Chambers 5 or 10 Chambers   Hardware Clearances
(add to nominal dimensions)
Drying/Curing Cabinets: Inlet and Exhaust Filter/Blower(Order desired filter(s) separately, below)
No. of
Chambers
Overall
Dimensions
Chamber Dimensions Acrylic*
110VAC, 50/60Hz 220VAC, 50Hz
W" x D" x H" (mm) W" x D" x H" (mm) Cat. # Price Cat. # Price
31 45.125x 24 x 36
(1146 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-32A Price 6082-36A Price
61 67.5 x 24 x 36
(1715 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-33A Price 6082-37A Price
52 45.125 x 24 x 60
(1146 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-34A Price 6082-38A Price
102 67.5 x 24 x 60
(1714 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-35A Price 6082-39A Price
Drying/Curing Cabinets: Inlet and Exhaust Filter/Blower(Order desired filter(s) separately, below)
No. of
Chambers
Overall
Dimensions
Chamber
Dimensions
Static-Dissipative PVC
110VAC, 50/60Hz 220VAC, 50Hz
W" x D" x H" (mm) W" x D" x H" (mm) Cat. # Price Cat. # Price
31 45.125x 24 x 36
(1146 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-40A Price 6082-44A Price
61 67.5 x 24 x 36
(1715 x 610 x 914)
22.625 x 24 x 12
(575 x 610 x 305)
6082-41A Price 6082-45A Price
52 45.125 x 24 x 60
(1146 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-42A Price 6082-46A Price
102 67.5 x 24 x 60
(1714 x 610 x 1524)
22.625 x 24 x 12
(575 x 610 x 305)
6082-43A Price 6082-47A Price
1 Includes inlet filter housing with one 740 CFM (1258 m³/hr) blower and outlet filter housing with one 1200 CFM (0.57 m³/s) exhaust blower (order filters separately)
2 Includes inlet filter housing with two 740 CFM (1258 m³/hr) blowers and outlet filter housing with two 1200 CFM (0.57 m³/s) exhaust blowers (order filters separately)
*Acrylic is damaged by alcohol and other cleaning agents.

Dual Filtering Capability Removes Particles and Fumes

These versatile cabinets can be equipped to provide dual filtration. A powerful 740 CFM (1258 m³/hr) blower with adjustable speed controls forces incoming air through a HEPA particle filter, rated 99.99% efficient with particles 0.3 µm in diameter, and then horizontally through the storage area (99.999% ULPA filters are also available).

The filtered air exits the cabinet through perforations on the opposing wall of the cabinet. Systems are also available with a filter housing on the exhaust side to facilitate final filtration (either HEPA or ULPA).

A second filter/blower system can be added in place of these exhaust openings to allow duct-free exhaust purification and release. These modules draw exhaust fumes through an activated carbon filter and an optional final particle filter to allow safe indoor venting. Equipped with dual opposing filter/blower modules, this drying cabinet maintains optimal air flow speeds and control over particles and chemical fumes to ensure both safe, effective parts drying and also full compliance with environmental safety regulations.

Clean, Practical Construction
The storage cabinet is available in several sizes and configurations to meet individual requirements. Each chamber includes dual electropolished 304 stainless steel racks that allow height adjustment of 304 stainless steel shelves in .5-inch (13 mm) increments to meet varying clearance requirements (order shelves separately).

Select cabinets of either acrylic or transparent static-dissipative PVC, a durable material that eliminates build-ups of surface charges (which are commonly generated by standard plastics). Static-dissipative PVC, which features a surface resistivity of about 107 ohms/square cm, also helps ensure cleanliness by eliminating particle attractions created by charged surfaces. All cabinets made of static-dissipative PVC feature grounded racks and ground terminals to allow easy connection to your in-house ground.

Custom Configurations Available!
These drying cabinets can be ordered in custom sizes, and with special shelving configurations and parts fixtures, to meet your requirements. Simply fax us your specifications—we'll provide a quotation on a system tailor-made to your application!

Specifications
Chamber  
Inside Dimensions: 25.625"W x 24"D x 12"H (651 mm x 610 mm x 305 mm), minus 1.062" (27 mm) on each side for electropolished 304 stainless steel racks
Construction: Solvent-welded acrylic or static-dissipative PVC with electropolished hinges and chrome-plated latches. One-piece closed-cell extruded gaskets maintain air-tight seals. Filter/blower housings are black acrylic (dissipative PVC available on a custom basis)
Blower: 740 CFM (1258 m³/hr), 1560 RPM impeller-type for inlet modules; 1200 CFM (2040 m³/hr), 1675 RPM impeller blower for exhaust modules.

Other Options

Stands — Made of stainless steel. Includes leveling feet.
For 3 and 5 Chamber Cabinets For 6 and 10 Chamber Cabinets
Drawer Height Cat. # Price Cat. # Price
Raises Cabinet 5"
(102 mm)
1740-45 Price 1740-93 Price
Raises Cabinet 12"
(330 mm)
1740-81 Price 1740-57 Price
3" (76 mm)
Heavy-Duty, Low-Profile Casters
Set of four, two with locking brakes
1700-44 Price

Filters
One filter per blower is required (see charts above). HEPA or ULPA filters may be combined with purification filters to provide final particle filtration.


Cat. # Price
HEPA Filter 1681-02 Price
Rated 99.99% efficient @ 0.3µm particles
ULPA Filter 1681-10 Price
Rated 99.99% efficient @ 0.12µm particles


Cat. # Price
Purification Filter 1716-00A call TUI
Removes common organic/solvent fumes
Purification Pre/Post Filter
1681-04A Price
One required on each side of No. 1716-00 to contain medium.


Cat. # Price
Stainless Steel Shelves (perforated) 1978-07 Price
Stainless Steel Shield (prevents scratching)
1978-08 Price

File Type File Name Publication Date
Manual (PDF) Curing Drying Cabinet: Doc. # 1800-77
10/06/2010
24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com