FREE CONSULTATION714-578-6100
  1. Home
  2. Laminar Flow Hoods, Fume Hoods, Biosafety Cabinets
  3. Laboratory Fume Hoods
  4. Labconco Protector XL Benchtop Fume hood

Protector XL Benchtop Laboratory Fume Hoods
by Labconco

Protector XL
cleanliness high
As a low velocity high-performance fume hood, the ergonomically designed Protector XL is designed with an array of containment-enhancing features well suited for a variety of general chemistry applications.
  • Benchtop models with two service fixtures and two electrical duplexes in 10', 12', and 16' nominal widths
  • Available 24", 30" and 36" depth options meet various installation and application requirements
  • By-pass airflow and by-pass block
  • Split dual tempered safety glass vertical-rising sashes with cable pulleys
  • Sashes fully raised without extending above hood with 10" high static viewing windows
  • Containment enhancing features: Clean-Sweep and Eco-Foil Air Foil opening, removable Opti-Zone™ Baffle
  • Composite panel liner and baffle made with chemical-resistant, fiberglass(reinforced)
  • Flame spread index of less than 25 per ASTM E84
  • Required Accessories: Cabinets, Remote Blower and Spillstopper Work Surface
  • One-Year Manufacturer Warranty from date of installation OR Two-Year Manufacturer Warranty from date of shipment
Protector XL Benchtop Laboratory Hoods
Labconco
Part #
Total Exhaust CFM and
Static Pressure, Sash Opening
Dimensions
W x D x H
Interior Depth Cat. # Price
100% (28") Open 62.5% (18") Open
CFM S.P. CFM S.P.
10' Protector XL Benchtop Laboratory Hood, 2 Service Fixtures and 2 Electrical Duplexes, 115V
111018002 2100 0.45" 1300 0.17" 120" x 37.7" x 59"
(3048 x 957.58 x 1499 mm)
30" 3649-40 $ 13,245
111028002 2100 0.45" 1300 0.17" 120" x 43.7" x 59"
(3048 x 1211.58 x 1499 mm)
36" 3649-41 $ 13,524
111008002 2100 0.45" 1300 0.17" 120" x 31.7" x 59"
(3048 x 805.18 x 1499 mm)
24" 3649-42 $ 12,911
12' Protector XL Benchtop Laboratory Hood, 2 Service Fixtures and 2 Electrical Duplexes, 115V
111118002 2560 0.62" 1585 0.24" 144" x 37.7" x 59"
(3658 x 957.58 x 1499 mm)
30" 3649-43 $ 13,973
111128002 2560 0.62" 1585 0.24" 144" x 43.7" x 59"
(3658 x >1211.58 x 1499 mm)
36" 3649-44 $ 14,261
111108002 2560 0.62" 1585 0.24" 144" x 31.7" x 59"
(3658 x 805.18 x 1499 mm)
24" 3649-45 $ 13,628
16' Protector XL Benchtop Laboratory Hood, 2 Service Fixtures and 2 Electrical Duplexes, 115V
111218002 3500 0.37" 2170 0.14" 192" x 39.2" x 59"
(4877 x 957.58 x 1499 mm)
30" 3649-46 $ 19,196
111228002 3500 0.37" 2170 0.14" 192" x 43.7" x 59"
(4877 1211.58 x 1499 mm)
36" 3649-47 $ 19,534
111208002= 3500 0.37" 2170 0.14" 192" x 31.7" x 59"
(4877 x 805.18 x 1499 mm)
24" 3649-48 $ 18,780
Specifications
Electrical 100-115 volts, 50/60 Hz, 10 amps
Material
  • Powder-coated stainless steel, 12.81" ID exhaust connections
  • Glacier white powder-coated steel exterior
  • Chemical-resistant molded composite panel liner spreads less than 25 per ASTM E-84
  • Powder-coated aluminum frame and sash handles
  • Tempered safety glass vertical-rising/manual sliding sash(es)>
Remote Blower Not Included
Electrical Duplex Two (2)
Service Fixtures Two (2) pre plumbed service fixtures made with forged brass valves; brass tubing for gas on lower right side; copper tubing for cold water on lower left side
Width Larger than 96"
Lighting Pre-wired T8 fluorescent; vapor-proof design and ADA-compliant light and blower switches
Conformance CFR 29, Part 1910, SEFA 1-2010, NFPA 45-2011, ASTM E84-09C, ASHRAE 110-1995, ANSI Z9.5-2011, UL 61010-1, CAN/CSA C22.2 No. 61010.1, UL 1805, SEFA 8-2010 (Cabinet Surface Finish Tests)
Model Type Benchtop
Additional Features:
  • By-pass airflow design
  • Patented aerodynamic Clean-Sweep™airflow openings pull inflow air from under curved air foil
  • Openings: Eco-Foil Air Foil and Clean-Sweepairflow
  • Composite panel liner and baffle made with chemical-resistant, fiberglass(reinforced)
  • Removable Opti-Zone™ Baffle has flame spread index of less than 25 per ASTM E84
  • Cord-Keeper™ Slots on right and left side of air foil
  • Factory prepared for:
    • Eight ADA-compliant service fixtures with two gooseneck faucets
    • Two gooseneck faucets
    • Four electrical duplex receptacles
  • Two-pre-wired GFCI electrical duplex receptacles—one on lower left and one on right side
  • Switch, electrical receptacle and service fixtures meet ADA height requirements
  • Removable front and side panels offer easy access to plumbing and electrical wiring
  • Required Accessories not included: Remote Blowers, Ductwork, SpillStopper Work Surfaces, Base Cabinets, Adjustable Height Base Stands
  • Optional Accessories (kits) for onsite installation: Service Fixture Kits, Electrical Duplex Kits, Airflow monitors, Ductwork, Distillation grid Kits, Sash stop Kits, Snuffer Fire Extinguisher, Guardian Airflow Monitor Kits, Ceiling Enclosure and Rear Finish Panel Kits
Top of Page

Required Accessories

Cabinets
Protector Acid Storage Cabinets
Protector Acid Storage Cabinets
 

Protector Acid Storage Cabinets

  • Compatible with: Protector XL Benchtop, Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; and HOPEC IV; Basic and Fiberglass 30 Hoods
  • Safely stores corrosive liquids and acids
  • Made with Durable epoxy-coated steel construction; interior made with corrosion-resistant polyethylene
  • Glacier white exterior coordinates with Labconco fume hoods and laboratory casework
  • Includes: Vacuum-formed PVC liner tray, four leveling feet and one 8" filler panel to cabinet depth from 22" to 30"
  • Max. Load Support: 800 lbs.
  • Filler Panel Depth: 8.0" (203.2 mm)
  • Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
  • Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
  • Optional Accessories: Vent Kits, Shelf Kits, Filler Panels
  • ADA-Compliant (Select Models)
     
Labconco
Part #
Dimensions
W x D
Max./Min.
Base Height
ADA Compliant Door Weight Cat. # Price
9905000 24" x 22"
(610 x 559 mm)
32.75"
(832 mm)/
31.5"
(800.1 mm)
Yes Single, Right Hinge, Manual Close 120 lbs.
(54 kg)
3649-49 $ 1,275
9905100 18" x 22"
(457.2 x 559 mm)
Yes Single, Right Hinge, Manual Close 85 lbs.
(39 kg)
3649-50 $ 1,227
9905200 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge, Manual Close 120 lbs.
(54 kg)
3649-51 $ 1,275
9905300 18" x 22"
(457.2 x 559 mm)
Yes Single, Left Hinge,
Manual Close
85 lbs.
(39 kg)
3649-52 $ 1,227
9901000 48" x 22"
(1219.5 x 559 mm)
36.75"
(933.5 mm)/
35.5"
(902 mm)
No Dual, Manual Close 260 lbs.
(118 kg)
3649-53 $ 1,377
9901100 36" x 22"
(914.5 x 559 mm)
No Dual, Manual Close 180 lbs.
(82 kg)
3647-23 $ 1,301
9901200 30" x 22"
(762 x 559 mm)
No Dual, Manual Close 155 lbs.
(70 kg)
3646-51 $ 1,254
9901300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge, Manual Close 130 lbs.
(59 kg)
3649-73 $ 1,212
9901400 18" x 22"
(457.2 x 559 mm)
No Single, Right Hinge, Manual Close 90 lbs.
(41 kg)
3649-55 $ 1,167
9901500 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Manual Close
130 lbs.
(59 kg)
3649-56 $ 1,212
9901600 18" x 22"
(457.2 x 559 mm)
No Single, Left Hinge,
Manual Close
90 lbs.
(41 kg)
3649-57 $ 1,167
Top of Page
Protector Solvent Storage Cabinets
Protector Solvent Storage Cabinets
 

Protector Solvent Storage Cabinets

  • Compatible with: Protector XL Benchtop, Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; HOPEC IV; Basic and Fiberglass 30 Hoods
  • Stores and vents flammable liquids and solvents
  • Made with durable dual wall epoxy-coated steel construction with 1.5" air gap
  • Includes: Epoxy-coated steel shelf; Two rear vent connections with flame arrestors and closure plugs; Four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30"
  • Max. Load support: 800 lbs.
  • Filler Panel Depth: 8.0" (203.2 mm)
  • Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
  • Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
  • Optional Accessories: Shelf Kits, Filler Panels ADA-Compliant
  • Select models ADA compliant
     
Labconco
Part #
Dimensions
W x D
Max./Min.
Base Height
ADA
Compliant
Door Weight Cat. # Price
9906000 24" x 22"
(610 x 559 mm)
32.75"
(832 mm)/
31.5"
(800.1 mm)
Yes Single, Right Hinge,
Manual Close
120 lbs.
(54 kg)
3649-58 $ 1,711
9906100 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge,
Manual Close
120 lbs.
(54 kg)
3649-59 $ 1,711
9906200 24" x 22"
(610 x 559 mm)
Yes Single, Right Hinge,
Automatic Close
120 lbs.
(54 kg)
3649-60 $ 1,999
9906300 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge,
Automatic Close
120 lbs.
(54 kg)
3649-61 $ 1,999
9902000 48" x 22"
(1219.5 x 559 mm)
36.75"
(933.5 mm)/
35.5"
(902 mm)
No Dual, Manual Close 260 lbs.
(118 kg)
3649-62 $ 1,826
9902100 36" x 22"
(914.5 x 559 mm)
No Dual, Manual Close 180 lbs.
(82 kg)
3649-63 $ 1,753
9902200 30" x 22"
(762 x 559 mm)
No Dual, Manual Close 155 lbs.
(70 kg)
3649-64 $ 1,696
9902300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge,
Manual Close
130 lbs.
(59 kg)
3649-65 $ 1,654
9902400 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Manual Close
130 lbs.
(59 kg)
3649-66 $ 1,654
9903000 48" x 22"
(1219.5 x 559 mm)
No Dual, Automatic Close 260 lbs.
(118 kg)
3646-04 $ 2,366
9903100 36" x 22"
(914.5 x 559 mm)
No Dual, Automatic Close 180 lbs.
(82 kg)
3646-09 $ 2,276
9903200 30" x 22"
(762 x 559 mm)
No Dual, Automatic Close 155 lbs.
(70 kg)
3646-52 $ 2,232
9903300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge,
Automatic Close
130 lbs.
(59 kg)
3649-67 $ 1,932
9903400 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Automatic Close
130 lbs.
(59 kg)
3649-68 $ 1,932
Top of Page
Protector Standard Storage Cabinets
48" wide (9900000) with Dual Doors
Protector Standard Storage Cabinets
24" Wide; Right Hinge, Single Door (9904000) ADA Compliant

 

Protector Standard Storage Cabinets

  • Compatible with: Protector XL Benchtop, Protector Premier, XStream, XPert Balance Enclosures, ClassMate, Stainless Steel, and PVC; HOPEC IV; Basic and Fiberglass 30 Hoods
  • Stores and vents mild acids, reagents and small lab instruments
  • Made with durable dual wall epoxy-coated steel construction with 1.5" air gap
  • Includes: Epoxy-coated steel shelf; Two rear vent connections with flame arrestors and closure plugs; Four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30"
  • Max. Load support: 800 lbs.
  • Filler Panel Depth: 8.0" (203.2 mm)
  • Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
  • Required Accessories: SpillStopper™ Work Surfaces or Flat Work Surfaces (Solid Epoxy or Stainless Steel)
  • Optional Accessories: Shelf Kits, Filler Panels
  • Select models ADA compliant
     
Labconco
Part #
Dimensions
W x D
Max./Min.
Base Height
ADA
Compliant
Door Weight Cat. # Price
9904000 24" x 22"
(610 x 559 mm)
32.75"
(832 mm)/
31.5"
(800.1 mm)
Yes Single, Right Hinge, Manual Close 120 lbs.
(54 kg)
3649-69 $ 1,069
9904100 18" x 22"
(457.2 x 559 mm)
Yes Single, Right Hinge, Manual Close 85 lbs.
(39 kg)
3649-70 $ 1,031
9904200 12" x 30"
(305 x 762 mm)
Yes Single, Right Hinge, Manual Close 60 lbs.
(27 kg)
3649-71 $ 979
9904300 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge,
Manual Close
120 lbs.
(54 kg)
3649-72 $ 1,069
9904400 18" x 22"
(457.2 x 559 mm)
Yes Single, Left Hinge,
Manual Close
85 lbs.
(39 kg)
3649-74 $ 1,031
9904500 12" x 30"
(305 x 762 mm)
Yes Single, Left Hinge,
Manual Close
60 lbs.
(27 kg)
3649-75 $ 979
9900000 48" x 22"
(1219.5 x 559 mm)
36.75"
(933.5 mm)/
35.5"
(902 mm
No Dual, Manual Close 260 lbs.
(118 kg)
3646-03 $ 1,185
9900100 36" x 22"
(914.5 x 559 mm)
No Dual, Manual Close 180 lbs.
(82 kg)
3646-08 $ 1,083
9900200 30" x 22"
(762 x 559 mm)
No Dual, Manual Close 155 lbs.
(70 kg)
3646-53 $ 1,054
9900300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge, Manual Close 130 lbs.
(59 kg)
3649-54 $ 1,005
9900400 18" x 22"
(457.2 x 559 mm)
No Single, Right Hinge, Manual Close 90 lbs.
(41 kg)
3649-76 $ 960
9900500 12" x 30"
(305 x 762 mm)
No Single, Right Hinge, Manual Close 65 lbs.
(29 kg)
3649-77 $ 915
9900600 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Manual Close
130 lbs.
(59 kg)
3649-78 $ 1,005
9900700 18" x 22"
(457.2 x 559 mm)
No Single, Left Hinge,
Manual Close
90 lbs.
(41 kg)
3649-79 $ 960
9900800 12" x 30"
(305 x 762 mm)
No Single, Left Hinge,
Manual Close
65 lbs.
(29 kg)
3649-80 $ 915
Top of Page

Spillstopper work surface
 

Spillstopper Work Surfaces

  • Available in 10', 12' and 16' nominal width work surfaces and three interior depth sizes
  • Made with corrosion resistant epoxy resins
  • Dished and contoured to conform to interior liner of Protector Laboratory Hoods
  • Large radius of front edge aerodynamically directs airflow into fume hood
  • Pre-drilled holes provided for venting and plumbing pass throughs
  • Select Models include 6" x 3" cupsink cutout
Labconco Part # Cupsink Cat. # Price
4005200 Oval Cupsink 3651-92 $ 74
4005201 Cupsink Cover 3651-93 $ 49
10' Spillstopper Work Surface, for Protector XL with 24" Interior Depth
  • For use with Protector Premier Laboratory Hoods and Protector XL Laboratory Hoods
  • Dimensions: 120 x 30 x 1.25 in. (3048 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 10'
  • Weight: 290 lbs.(132 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9500000 None 3649-81 $ 2,460
9500010 Left rear 3649-82 $ 2,566
9500001 Right Rear 3649-83 $ 2,566
9500020 Left side. Not for use with Protector Solvent Storage Cabinets 3649-84 $ 2,566
9500002 Right side. Not for use with Protector Solvent Storage Cabinets 3649-85 $ 2,566
9500000 Left and right rear 3649-86 $ 2,666
10' Spillstopper Work Surface, for Protector XL with 30" Interior Depth
  • For use with Protector XL Laboratory Hoods
  • Dimensions: 120 x 36 x 1.25 in. (3048 x 914.5 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 10'
  • Weight: 320 lbs.(145 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9501000 None 3649-87 $ 2,955
9501010 Left rear 3649-88 $ 3,060
9501001 Right Rear 3649-89 $ 3,060
9501020 Left side. Not for use with Protector Solvent Storage Cabinets 3649-90 $ 3,060
9501002 Right side. Not for use with Protector Solvent Storage Cabinets 3649-91 $ 3,060
9501011 Left and right rear cupsink cutouts 3649-92 $ 3,161
10' Spillstopper Work Surface, for Protector XL with 36" Interior Depth
  • For use with Protector XL Laboratory Hoods
  • Dimensions: 120 x 42 x 1.25 in. (3048 x 1067 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 10'
  • Weight: 350 lbs. (159 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9502000 None 3649-93 $ 4,617
9502010 Left rear 3649-94 $ 4,725
9502001 Right Rear 3649-95 $ 4,725
9502020 Left side. Not for use with Protector Solvent Storage Cabinets 3649-96 $ 4,725
9502002 Right side. Not for use with Protector Solvent Storage Cabinets 3649-97 $ 4,725
9502011 Left and right rear 3649-98 $ 4,823
12' Spillstopper Work Surface, for Protector XL with 24" Interior Depth
  • For use with Protector XL Laboratory Hoods and Protector Premier Laboratory Hoods
  • Dimensions: 144 x 30 x 1.25 in. (3658 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 12'
  • Weight: 370 lbs. (168 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9500100 None 3649-99 $ 3,353
9500110 Left rear 3650-00 $ 3,467
9500101 Right Rear 3650-01 $ 3,467
9500120 Left side. Not for use with Protector Solvent Storage Cabinets 3650-02 $ 3,467
9500102 Right side. Not for use with Protector Solvent Storage Cabinets 3650-03 $ 3,467
9500111 Left and right rear 3650-04 $ 3,559
12' Spillstopper Work Surface, for Protector XL with 30" Interior Depth
  • For use with Protector XL Laboratory Hoods
  • Dimensions: 144 x 36 x 1.25 in. (3658 x 914.5 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 12'
  • Weight: 440 lbs. (200 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9501100 None 3650-05 $ 3,893
9501110 Left rear 3650-06 $ 3,989
9501101 Right Rear 3650-07 $ 3,989
9501120 Left side. Not for use with Protector Solvent Storage Cabinets 3650-08 $ 3,989
9501102 Right side. Not for use with Protector Solvent Storage Cabinets 3650-09 $ 3,989
9501111 Left and right rear 3650-10 $ 4,088
12' Spillstopper Work Surface, for Protector XL with 36" Interior Depth
  • For use with Protector XL Laboratory Hoods
  • Dimensions: 144 x 42 x 1.25 in. (3658 x 1067 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 12'
  • Weight: 480 lbs. (218 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9502100 None 3650-11 $ 5,456
9502110 Left rear 3650-12 $ 5,562
9502101 Right Rear 3650-13 $ 5,562
9502120 Left side. Not for use with Protector Solvent Storage Cabinets 3650-14 $ 5,562
9502102 Right side. Not for use with Protector Solvent Storage Cabinets 3650-15 $ 5,562
9502111 Left and right rear 3650-16 $ 5,663
16' Spillstopper Work Surface, for Protector XL with 24" Interior Depth
  • For use with Protector Premier Laboratory Hoods and Protector XL Laboratory Hoods
  • Dimensions: 192 x 30 x 1.25 in. (4877 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 16"
  • Weight: 480 lbs. (218 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9500200 None 3650-17 $ 3,634
9500210 Left rear 3650-18 $ 3,736
9500201 Right Rear 3650-19 $ 3,736
9500220 Left side. Not for use with Protector Solvent Storage Cabinets 3650-20 $ 3,736
9500202 Right side. Not for use with Protector Solvent Storage Cabinets 3650-21 $ 3,736
9500211 Left and right rear 3650-22 $ 3,826
16' Spillstopper Work Surface, for Protector XL with 30" Interior Depth
  • For use with Protector XL Laboratory Hoods
  • Dimensions: 192 x 36 x 1.25 in. (4877 x 914.5 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 16"
  • Weight: 500 lbs. (227 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9501200 None 3650-23 $ 4,861
9501210 Left rear 3650-24 $ 4,965
9501201 Right Rear 3650-25 $ 4,965
9501220 Left side. Not for use with Protector Solvent Storage Cabinets 3650-26 $ 4,965
9501202 Right side. Not for use with Protector Solvent Storage Cabinets 3650-27 $ 4,965
9501211 Left and right rear 3650-28 $ 5,059
16' Spillstopper Work Surface, for Protector XL with 36" Interior Depth
  • For use with Protector XL Laboratory Hoods
  • Dimensions: 192 x 42 x 1.25 in. (4877 x 1067 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 16"
  • Weight: 550 lbs. (249 kg)
Labconco
Part #
Cupsink Cutouts Cat. # Price
9502200 None 3650-29 $ 7,855
9502210 Left rear 3650-30 $ 7,968
9502201 Right Rear 3650-31 $ 7,968
9502220 Left side. Not for use with Protector Solvent Storage Cabinets 3650-32 $ 7,968
9502202 Right side. Not for use with Protector Solvent Storage Cabinets 3650-33 $ 7,968
9502211 Left and right rear 3650-34 $ 8,070
Top of Page

Coated Steel Remote BlowersModerate to highly corrosive hood applications
 

Coated Steel Remote Blowers

  • For use with Labconco Laboratory fume hoods, canopy-ducted Type A2 cabinets and required for Type B2 cabinets
  • Low to moderately corrosive hood applications
  • Flow-through vent holes and louvers cool motor by circulating air; extends motor life
  • Material: corrosion resistant phenolic-coated impeller and housing; powder-coated steel base resist extreme weather
  • Includes removable weather cover for easy lubrication; sheave alignment enhances performance and extends motor life
  • Motor: belt-drive with adjustable sheave and self-adjusting gravity belt tightener
  • Durable and easy maintenance with factory lubricated pillow block bearings
  • Flexible installation with adjustable variable exhaust orientation (adjusts to 8 outlet positions)
  • Quiet operation and optimum air delivery with balanced air impellers
  • Quiet operation: 64 – 88 decibels depending on blower size
  • Meets demanding daily ventilation requirements of various hood types
  • Available in a wide range of capacities from 370 to 1960 CFM at static pressures to 1.50" H20
  • Contact a Terra product expert for electrical configurations
  • *Power Cord & Plug: 8', 3-wire cord, and plug
  • Manufacturer Warranty: One year parts and labor from date of installation or two years from date of shipment.
Option: *Explosion-proof models available with non-sparking polypropylene impellers and explosion proof motors are UL listed for maximum safety.
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7068000 92 lbs.
(42 kg)
115 V, 60 Hz,
1 phase, 4.0 amps
10.78" ID/5.5" d x 10.00" w 529-807 1/6 Less than 1000 3645-52 $ 1,657
7068200 92 lbs.
(42 kg)
115V, 60 Hz,
1 phase, 4.4 amps
752-1067 1/4 Less than 1000 3645-53 $ 1,751
7068400 86 lbs.
(39 kg)
115V, 60 Hz, 1 phase, 6.1 amps 929-1260 1/3 Less than 1000 3650-35 $ 1,712
7068600 88 lbs.
(40 kg)
115V, 60 Hz, 1 phase, 8.4 amps 1073-1456 1/2 Less than 1000 3650-36 $ 1,816
7068800 90 lbs.
(41 kg)
115V, 60 Hz, 1 phase, 6.1 amps 12.25" OD/
7" d x 13.50" w
373-569 1/3 Less than 1000 3650-37 $ 1,853
7069000 96 lbs.
(44 kg)
115V/60 Hz/1Ø/8.4 amps 532-753 1/2 Between 1000 and 2000 3650-38 $ 1,933
7069200 100 lbs.
(45 kg)
115V, 11.6amps/
230V, 5.8 amps/60 Hz/1 phase
667-946 3/4 Between 1000 and 2000 3650-39 $ 2,128
7069400 100 lbs.
(45 kg)
115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø 828-1173 1 Between 1000 and 2000 3650-40 $ 2,283
7069600 114 lbs.
(52 kg)
115V, 20.4amps/230V, 10.2 amps/60 Hz/1Ø 881-1248 1 1/2 Between 2000 and 3000 3650-85 $ 2,370
Explosion Proof Coated Steel Blowers
7068100 92 lbs.
(42 kg)
115V/60 Hz/1Ø/3.15 amps 10.78" ID/5.5" d x 10.00" w 529-807 1/6 Less than 1000 3650-42 $ 2,283
7068300* 92 lbs.
(42 kg)
115V/60 Hz/1Ø/4.5 amps 752-1067 1/4 Less than 1000 3650-43 $ 2,370
7068500* 86 lbs.
(39 kg)
115V/60 Hz/1Ø/6.4 amps 929-1260 1/3 Less than 1000 3650-44 $ 2,402
7068700 98 lbs.
(44 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 1073-1456 1/2 Less than 1000 3650-45 $ 2,462
7068900 90 lbs.
(41 kg)
115V/60 Hz/1Ø/6.4 amps 12.25" OD/
7" d x 13.50" w
373-569 1/3 Less than 1000 3650-46 $ 2,492
7069100 102 lbs.
(46 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 532-753 1/2 Between 1000 and 2000 3650-47 $ 2,589
7069300 108 lbs.
(49)
115V, 11.4 amps/230V, 5.7 amps/60 Hz/1Ø 667-946 3/4 Between 1000 and 2000 3650-58 $ 2,917
7069500 114 lbs.
(52 kg)
115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø 828-1173 1 Between 1000 and 2000 3650-59 $ 3,181
7069700 114 lbs.
(52 kg)
230V, 4.8 amps/460V, 2.4 amps/60 Hz/3Ø 881-1248 1 1/2 Between 2000 and 3000 3650-60 $ 3,271
7071900 100 lbs.
(45.5 kg)
230V, 5.8 amps/
460V, 2.9 amps,60 Hz
828-1173 1 Between 1000 and 2000 3650-61 $ 2,408

Fiberglass BlowerModerate to highly corrosive hood applications
 

Fiberglass Blowers

  • For use with Labconco fume hoods and biosafety cabinets
  • Superior corrosion resistance and ideal for moderate to highly corrosive hood applications/conditions; not for use with Perchloric acid
  • Low RPM blowers for quiet operation
  • Material: Molded fiberglass reinforced polyester housing; impellers made of injection-molded polypropylene; dry powder epoxy-coated base and weather cover provide long life
  • Select fiberglass blowers deliver as little as 325 CFM at .12" static pressure or up to 2050 CFM at 4.0" static pressure
  • Air circulation through flow-through vent holes and louvers cools and prolongs motor life
  • Adjustable sheaves for air volume adjustment
  • Bonded impeller reduces maintenance and increases longevity
  • Gravity belt tightener self-adjusts for consistent performance and motor mount secures motor in event of belt failure
  • Required Accessories: Ductwork
  • Flexible installation with variable exhaust adjusting to three outlet positions
  • Depending on blower size, sound levels with 10" and 12" diameter inlets range between 64 and 88 decibels
  • Manufacturer Warranty: One year parts and labor from date of installation or two years from date of shipment.

Option: *Explosion-proof models available with non-sparking polypropylene impellers and explosion proof motors are UL listed for maximum safety.

Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7180000 92 lbs.
(42 kg)
115V/60 Hz/
1Ø/4.0 amps
10.38" OD Inlet,
10.75" ID Outlet
630-962 1/6 Less than 1000 3650-86 $ 2,370
7180200 92 lbs.
(42 kg)
115V/60 Hz/
1Ø/4.4 amps
828-1173 1/4 Less than 1000 3646-57 $ 2,471
7180400 86 lbs.
(39 KG)
115V/60 Hz/
1Ø/6.1 amps
1073-1456 1/3 Less than 1000 3650-62 $ 2,560
7180600 88 lbs.
(40 kg)
115V/60 Hz/
1Ø/8.4 amps
1305-1772 1/2 Less than 1000 3650-63 $ 2,629
7180800 90 lbs.
(41 kg)
115V/60 Hz/
1Ø/4.0 amps
12.38" OD Inlet,
12.75" ID Outlet
373-569 1/6 Less than 1000 3650-64 $ 2,629
7181000 96 lbs.
(44 kg)
115V/60 Hz/
1Ø/4.4 amps
532-753 1/4 Less than 1000 3650-65 $ 2,808
7181200 100 lbs.
(45 kg)
115V/60 Hz/
1Ø/8.4 amps
690-978 1/2 Between 1000 and 2000 3650-66 $ 3,669
7181400 100 lbs.
(45 kg)
115V, 11.6 amps/
230V, 5.8 amps/60 Hz/1Ø
920-1303 3/4 Between 1000 and 2000 3650-67 $ 3,779
7181600 114 lbs.
(52 kg)
115V, 20.4 amps/
230V, 10.2 amps/60 Hz/1Ø
1207-1639 1 1/2 Between 1000 and 2000 3650-68 $ 3,937
7182000 290 lbs.
(132 kg)
208-230V, 6.8 amps/
460V, 3.4 amps/60 Hz/3Ø
15.63" OD Inlet,
16" ID Outlet
1083-1469 2 Between 2000 and 3000 3650-69 $ 4,379
7182200 365 lbs.
(166 kg)
208-230V, 9.7 amps/
460V, 4.85 amps/60 Hz/3Ø
1309-1777 3 Greater than 3000 3650-70 $ 4,887
Explosion Proof Fiberglass Blowers
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7180100 92 lbs.
(42 kg)
115V/60 Hz/
1Ø/3.15 amps
10.38" OD Inlet,
10.75" ID Outlet
630-962 1/6 Less than 1000 3650-71 $ 2,839
7180300 92 lbs.
(42 kg)
115V/60 Hz/
1Ø/4.5 amps
828-1173 1/4 Less than 1000 3650-73 $ 3,202
7180500 86 lbs. (39 KG) 115V/60 Hz/
1Ø/6.4 amps
1073-1456 1/3 Less than 1000 3650-72 $ 3,076
7180700 98 lbs.
(44 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 1305-1772 1/2 Less than 1000 3650-74 $ 3,169
7180900 90 lbs.
(41 kg)
115V/60 Hz/
1Ø/3.15 amps
12.38" OD Inlet,
12.75" ID Outlet
373-569 1/6 Less than 1000 3650-75 $ 3,262
7181100 102 lbs.
(46 kg)
115V/60 Hz/
1Ø/4.5 amps
532-753 1/4 Less than 1000 3650-76 $ 3,335
7181300 108 lbs.
(49 kg)
115V, 9.0 amps/
230V, 4.5 amps/60 Hz/1Ø
690-978 1/2 Between 1000 and 2000 3650-77 $ 4,172
7181500 114 lbs.
(52 kg)
115V, 11.4 amps/
230V, 5.7 amps/60 Hz/1Ø
920-1303 3/4 Between 1000 and 2000 3650-78 $ 4,298
7181700 114 lbs.
(52 kg)
230V, 4.8 amps/
460V, 2.4 amps/60 Hz/3Ø
1207-1639 1 1/2 Between 1000 and 2000 3650-79 $ 4,448
7182100 345 lbs.
(156 kg)
208-230V, 6.0 amps/
460v, 3.0 amps="amps"/60 hz/3ø
15.63" OD Inlet,
16" ID Outlet
1083-1469 2 Between 2000 and 3000 3650-80 $ 4,887
7182300 370 lbs.
(168 kg)
208-230V, 8.4 amps/
460V, 4.2 amps/60 Hz/3Ø
1309-1777 3 Greater than 3000 3650-81 $ 5,289
Top of Page

pvc blowerOptimum chemical resistance in very highly corrosive hood applications
 

PVC Blowers

  • For use with Labconco fume hoods and biosafety cabinets
  • Provides optimum chemical resistance and able to handle perchloric acid and other high order oxidizers; low RPM blowers for quiet operation
  • Designed with drain connection on lower portion of housing to enable use of washdown system
  • Vacuum formed housing made with unplasticized Type I polyvinyl chloride for complete corrosion protection
  • Material: Dry powder epoxy-coated base and weather cover extends blower life in extreme weather; unplasticized Type I polyvinyl chloride housing
  • Adjustable sheaves for air volume adjustment
  • Air circulation through flow-through vent holes and louvers cools and prolongs motor life
  • Injection molded PVDF impellers resist highly corrosive atmospheres
  • Bonded impeller reduces maintenance and increases longevity; easy maintenance with easy access to impeller assembly
  • Gravity belt tightener self-adjusts for consistent performance and motor mount secures motor in event of belt failure
  • Flexible installation with variable exhaust adjusting to three outlet positions
  • Easy installation with inlet and discharge diameters sized to directly receive rigid PVC ducting material
  • Blowers available with 10" and 12" inlet/outlet connections
  • Sound levels: Between 64 and 88 decibels depending on blower size
  • Required Accessories: Ductwork
  • Manufacturer Warranty: One year parts and labor from date of installation or two years from date of shipment.
     
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7183000 90 lbs. (41 kg) 115V/60 Hz/1Ø/8.4 amps 10.38" OD Inlet, 10.75" ID Outlet 1150-1561 1/2 Less than 1000 3650-82 $ 3,303
7183100 90 lbs. (41 kg) 115V/60 Hz/1Ø/8.4 amps 12.38" OD Inlet, 12.75" ID Outlet 881-1248 1/2 Between 1000 and 2000 3650-83 $ 4,009
7183200 100 lbs. (45 kg) 115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø 1208-1639 1 Between 1000 and 2000 3650-84 $ 4,472

You Might Also Like

Protector XL Floor-Mount Walk-In Laboratory Fume Hoods

Related Products:

Top of Page

File Type File Name Publication Date
Brochure (PDF) Protector Laboratory Fume Hoods Brochure by Labconco
Provides a brief introduction to features and available accessories for Protector Laboratory Fume Hoods by Labconco. Product specifications included.
04/08/2016
White Paper (PDF) Face Velocity Standards, by Labconco
Learn more about fume hoods, specifically the performance of a fume hood — what’s important and how to test for it.
05/18/2015
White Paper (PDF) What Type of Fume Hood do I Specify? By Labconco
Tips and considerations for choosing the best fume hood for your laboratory and applications.
05/18/2015
White Paper (PDF) Spillstopper Work Surface Compatibility Chart for the Protector XL Models by Labconco
Find out which Spillstopper Work Surface is compatible with the Protector XL Benchtop Laboratory Fume Hoods by Labconco. Product specifications included.
01/01/2016
Tech Resource (PDF) ADA-Compliant Protector Solvent Storage Cabinet
Specifications for Labconco's ADA-Compliant Protector Solvent Storage Cabinet with self-closing door(s).
05/07/2015
Tech Resource (PDF) Installation of Vents on Protector Solvent Storage Cabinets
How to install vents on Labconco's Protector Solvent Storage Cabinets.
05/07/2015
Tech Resource (PDF) CE Declaration of Conformity: Labconco Storage Cabinets
05/07/2015
Manual (PDF) User's Manual: Protector® Storage Cabinets – Standard, Acid, Solvent and Vacuum Pump
Manual and guide for Labconco's Protector Storage Cabinets.
05/07/2015
Click to leave a message. 24-hour sales and tech phone support, M - F
Call a Terra Hood specialist direct
Hours: 5:30 - 17:30 M-F
(your local time)
Go to...
Go To
Laboratory-Equipment.com