Terra Part # 2903-09
$1,286
Usually ships in 1-3 business days

Want it faster ? Read about FasTrak

Stocked Item is in stock and ready for immediate shipping
Accessories related to Terra Part # 2903-09
62666
Work Station; Epoxy Resin, Solid Top, 96" W x 30" D x 32" H

• Heat Deflection: 325°F (162.7°C)

• Beveled edges for safety

• Fully welded and ground smooth

• Ideal for use in corrosive or high moisture level environments

• Bacterial and fungal resistant; volatile/non-volatile chemical resistant

• Self-extinguishing

• Non-reactive surface

• Uniform low-sheen finish

• Non-absorbent and corrosion resistant

• Epoxy resin 96"W x 30"D x 1"H (2440 x 762 x 25 mm) table top

• Nylon with 1-3/8” base

• Available Accessories: suspended cabinet, four post hydraulic lift, shelving, cup holder, power strip, computer accessories, locking casters

• Note: Upper shelf accessories ship unassembled. Customer is responsible for installing uprights to tables, and shelf bracket assemblies to the uprights.

• Nylon leveling feet, resist a wide range of chemicals and provides stability

Type: Fixed Height

Top Design: Solid

Frame Material: PCS

Height: 32"

Manufactured by: Terra Universal

Top Material: Epoxy Resin

Width: 96"

Depth: 30"

Load Capacity: 2,000 lb

Auto Adjust: No

Unit of Measure: EA

Weight, Product: 400 lb

Dimensions, Product: 96" W x 30" D x 32" H

Weight, Shipping: 442 lb

Dimensions, Shipping: 100" W x 48" D x 37" H

Package Type: Crate

Buy Accessories
  1. Drawers; 304 SS, Left Mounted for TUI Work Stations
    Request Quote
    Increase Down Increase Up
  2. Drawers; 304 SS, Right Mounted for TUI Work Stations
    Request Quote
    Increase Down Increase Up
  3. Stackable drawers mount easily under work surfaces and shelves.
    Request Quote
    Increase Down Increase Up
  4. Stackable drawers mount easily under work surfaces and shelves.
    Request Quote
    Increase Down Increase Up
  5. These polymer Mobile Drawer Cabinets have a smooth design that eliminates sharp edges and corners where dust can accumulate | 1704-01 displayed
    Request Quote
    Increase Down Increase Up
  6. Bring power safely and conveniently to wherever you need it with a full line Plug-In Outlet | 1681-80 displayed
    Power Strip; 4 Outlets, 120VAC/60Hz, Installed Stocked Item is in stock and ready for immediate shipping
    $200
    Increase Down Increase Up
  7. Stainless Steel Leg Member
    $38
    Increase Down Increase Up
  8. A convenient space-efficient CPU rack | 1741-19 displayed
    $395
    Increase Down Increase Up
  9. BioSafe® Foot Rest offers all-stainless-steel construction, height adjustability, and non-shedding leveling feet | 2803-90 displayed
    Footrest; ISO 5, 304 Stainless Steel, 18" W x 12" D x 12" H, Adjustable, BioSafe® Stocked Item is in stock and ready for immediate shipping
    $296
    Increase Down Increase Up
  10. Adjustable foot rest. Product details may differ. | 2804-84 displayed
    Footrest; ISO 5, Chrome-Plated Steel, 20" W x 11" D x 11" H, Adjustable, BioFit Stocked Item is in stock and ready for immediate shipping
    $108
    Increase Down Increase Up
  11. Maximizes worker comfort and productivity | 2804-83 displayed
    Footrest; ISO 5, Black Powder-Coated Steel, 20"W x 11"D x 11"H, Adjustable, BioFit Stocked Item is in stock and ready for immediate shipping
    $86
    Increase Down Increase Up
  12. Stianless steel footrest with a pneumatic cylinder for use in ISO 7 and ISO 8 cleanrooms | 2803-92 displayed
    Footrest; ISO 5, 304 Stainless Steel, Tilting/Adjustable Stocked Item is in stock and ready for immediate shipping
    $586
    Increase Down Increase Up
  13. FasTrak 24-7 Expediting Service
    Request Quote
    Increase Down Increase Up

Features and Benefits

Epoxy Resin Table Specifications

More Information

  • Applications for Epoxy Resin Lab Tables: Proteomics, biochemistry, New Lab Set Up and Wet Chemistry
  • Chemical Resistance Testing For Epoxy Resin Table Tops: Epoxy resin lab tabletops are individually tested for their corrosion resistance against organic compounds and volatile/non-volatile chemicals.
  • Test temperature for Method A and B: 23° +/- 2°C (73° +/- 4°F
  • Method A - Volatile chemicals A cotton ball saturated with the test solvent was placed in a one-ounce bottle (10 mm x 75 mm test tube or similar container). The bottle was inverted on the test material surface for a period of 24 hours.
  • Method B - Nonvolatile chemicals Five drops (1/4 cc) of the test chemical covered with a 25mm watch glass were placed on the test material surface for a period of 24 hours. This method was used for all chemicals listed below, other than the solvents.
Evaluation Method
Epoxy resin material was exposed to chemicals for 24-hours. Exposed areas were washed with three substances in the following order: water, detergent solution and isopropyl alcohol. Then, the material was rinsed with distilled water and dried with a cloth. Samples are numerically rated as follows:
  • 0 - No Effect: No detectable change in the material surface.
  • 1 - Good: Slight detectable change in color or gloss, but no change in function or life of the surface.
  • 2 - Fair: Slight surface etching or severe staining. Clearly discernible change in color or gloss but no significant impairment of surface life or function.
  • 3 - Poor: Pitting, cratering or erosion of the surface. Obvious and significant deterioration. Objectionable change in appearance due to discoloration.
Evaluation Results of Epoxy Resin Lab Table Work Surface on Compounds and Chemicals
Chemical Tested*MethodBlack Onyx
Amyl AcetoneA0
Ethyl AcetoneA0
Acetic Acid 98%B0
AcetoneA1
Acid Dichromate 5%B0
Butyl AlcoholA0
Ethyl AlcoholA0
Methyl AlcoholA1
Ammonium Hydroxide, 28%B0
BenzeneA1
Carbon TetrachlorideA0
ChloroformA1
Chromic Acid 60%B2
CresolA0
Dichloride Acetic AcidA0
DimethylformamideA0
DioxaneA0
Ethyl EtherA0
Formaldehyde 37%A0
Formic Acid 90%B0
FurfuralA1
GasolineA0
Hydrochloric Acid 37%B0
Hydrofluoric Acid 48%B2
Hydrogen Peroxide 28%B0
Tincture of IodineB0
Methyl Ethyl KetoneA0
Methylene ChlorideA0
Mono ChlorobenzeneA0
NaphthaleneA0
Nitric Acid 20%B0
Nitric Acid 30%B1
Nitric Acid 70%B1
Phenol 90%A0
Phosphoric Acid 85%B1
Silver Nitrate, SaturatedB0
Sodium Hydroxide 10%B1
Sodium Hydroxide 20%B1
Sodium Hydroxide 40%B1
Sodium Hydroxide FlakeB1
Sodium Sulfide, SaturatedB2
Sulfuric Acid 25%B1
Sulfuric Acid 85%B2
Sulfuric Acid 96%B3
Sulfuric Acid 85% and Nitric Acid 70%, Equal PartsB3
TolueneA1
TrichloroethyleneA0
XyleneA0
Zinc Chloride, SaturatedB0
*More information on independent test results available upon request. Call Terra Universal at 714-578-6100.

ErgoHeight Intuitive Controls

ErgoHeight compact control panel includes four buttons for user height presets and a digital display

High Caliber Hardware

Don’t be concerned about the quality, durability, and craftsmanship of your latches, ports, glides and hinges. Terra’s products are made of long lasting, cleanroom compatible, top tier hardware.

Durable Powder Coating Finish

Terra’s durable powder coating formulation exceeds the ASTM and ISO paint standards for hardness, thickness, humidity resistance, gloss and impact testing.

Adjustable Telescoping Legs

Workstations include telescoping legs to enhance ergonomics, reduce shipping cost, integrate with existing tables or casework, and support multiple operators who require different work surface heights. Each telescoping workstation is tested to ensure a weight load of 1,200 pounds.

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.

Hide
You need at least 2 products to compare Compare Clear All
Compare Products