714-578-6100
M-F, 5:30am - 5:30pm, L.A. Time

Vertical Laminar Flow Stations

Vertical Laminar Flow Station
Shown with optional Motorized Sliding Shield
 
Features Key
  Standard
  Option

A Fluorescent light standard, UV sterilizatin bulbs available
B Side Panels ensure effective laminar flow
C Work Surfaces available in many sizes and materials. Two-piece design isolates FFU vibration
D Digital Control Panel
• Filter/Fan Unit
• Light
• Backpressure Alarm
• Sliding Shield
E Motorized Sliding Shield extends 3" – 25" (76 mm-635 mm) below hood to restrict access to work area and improve system efficiency. Rated for millions of operations!
F Modular Cleanroom Drawers—select stainless steel or plastic
G Steel-reinforced nylon levelors resist most chemicals
H Status Indicator

  • Economical system provides a laminar flow of HEPA-filtered air to meet the most critical contamination requirements
  • Incorporates industry-leading 50 dBA blowers for quiet, low-vibration operation
  • All-stainless steel construction is cleanroom compatible and easy to clean
  • Wet station VLF includes polypropylene rear panel for chemical resistance
  • Side panels and optional front motorized access sash effectively control the laminar air stream to achieve the air speed you require
  • Fluorescent illuminators ensure easy viewing
  • Optional ionization equipment safely neutralizes static charges throughout the work area for effective ESD protection
  • Accommodates standard Terra work benches in many materials, as well as standard Terra wet processing stations
Ordering Information
Order the Vertical Laminar Flow Station, Filter/Fan Units (FFUs), and other optional accessories separately from the charts below. Selected accessories are installed in the corresponding Vertical Laminar Flow Station and shipped as a turnkey system, ready for operation.
Vertical Laminar Flow Stations Dimensions
Optional sash retracts 3" - 25" below hood
Laminar Flow Hoods — Cleanroom Benches Dimensions

Laminar FLow Hoods —Cleanroom Drawers Cleanroom Drawers
available in
ABS Plastic and
Stainless Steel.

Ordering Charts: Click prices to configure and add to cart

Stainless Steel Vertical Laminar Flow Station

Stainless Steel Vertical Laminar Flow Station Motorized Shield
Station
Dimensions
inches
(mm)
Work Bench
Dimensions
inches
(mm)
No. of FFUs
required
ft.
(mm)
304 Stainless Steel Static-Dissipative
PVC
Static-Dissipative PVC
120VAC, 50/60Hz 220VAC, 50Hz
A B C x D (order above) Cat# Price Cat# Price Cat# Price
52
(1321)
49
(1245)
48 x 30
(1219 x 762)
(1) 2 x 4
610 x 1219
2001-30A Price 2001-30A-220 Price 9207-04 Price
64
(1626)
61
(1549)
60 x 30
(1524 x 762)
(1) 2 x 2 + (1) 2 x 3
610 x 610 + 610 x 914
2001-31A *
Price 2001-31A-220 * Price 9207-05 Price
76
(1930)
73
(1854)
72 x 30
(1829 x 762)
(2) 2 x 3
610 x 914
2001-32A Price 2001-32A-220 Price 9207-06 Price
100
(2540)
97
(2464)
96 x 30
(2438 x 762)
(2) 2 x 4
610 x 1219
2001-33A Price 2001-33A-220 Price 9207-07 Price
* Because 64” (1626 mm) -wide units use FFUs of different sizes, air velocity measurements taken across the hood width may not be completely uniform. Select 52" (1321 mm), 76" (1930 mm) or 100" (2540 mm) widths if uniformity is required.

Powder Coated Steel Vertical Laminar Flow Station

Powder Coated Steel Vertical Laminar Flow Station Motorized Shield
Station
Dimensions
inches
(mm)
Work Bench
Dimensions
inches
(mm)
No. of FFUs
required
ft.
(mm)
Powder Coated Steel Static-Dissipative
PVC
Static-Dissipative PVC
120VAC, 50/60Hz 220VAC, 50Hz
A B C x D (order above) Cat# Price Cat# Price Cat# Price
52
(1321)
49
(1245)
48 x 30
(1219 x 762)
(1) 2 x 4
610 x 1219
2001-80A Price 2001-80A-220 Price 9207-04 Price
64
(1629)
61
(1549)
60 x 30
(1524 x 762)
(1) 2 x 2 + (1) 2 x 3'
610 x 610 + 610 x 914
2001-81A *
Price 2001-81A-220 *
Price 9207-05 Price
76
(1930)
73
(1854)
72 x 30
(1829 x 762)
(2) 2 x 3
610 x 914
2001-82A Price 2001-82A-220 Price 9207-06 Price
100
(2540)
97
(2464)
96 x 30
(2438 x 762)
(2) 2 x 4
 610 x 1219
2001-83A Price 2001-83A-220 Price 9207-07 Price
* Because 64” (1626 mm) -wide units use FFUs of different sizes, air velocity measurements taken across the hood width may not be completely uniform. Select 52" (1321 mm), 76" (1930 mm) or 100" (2540 mm) widths if uniformity is required.

Solid Top Work Benches

Corresponding Solid Top Work Benches
Station
Dimensions
inches
(mm)
Work Bench
Dimensions
inches
(mm)
Nonconductive
Laminate Top
Conductive
Laminate Top
Static-Dissipative PVC
304 Stainless Steel
Top
Polypropylene
Top
A B C x D Cat# Price Cat# Price Cat# Price Cat# Price
52
(1321)
49
(1245)
48 x 30
(1219 x 762)
1722-00 Price 1728-00 Price 1521-45 Price 1522-00 Price
64
(1626)
61
(1549)
60 x 30
(1524 x 762)
1724-00 Price 1730-00 Price 1751-00 Price 1522-01 Price
76
(1930)
73
(1854)
72 x 30
(1829 x 762)
1726-00 Price 1732-00 Price 1752-00 Price 1522-02 Price
100
(2540)
97
(2464)
96 x 30
(2438 x 762)
2402-00 Price 2400-00 Price 1753-00 Price 1522-04 Price

Perforated Top Work Benches

Corresponding Perforated Top Work Benches
Station
Dimensions
inches
(mm)
Work Bench
Dimensions
inches
(mm)
304 Stainless Steel Top 304 Stainless Steel Top
(Polypropylene Plenum)
Static-Dissipative PVC
A B C x D Cat# Price Cat# Price
52
(1321)
49
(1245)
48 x 30
(1219 x 762)
1522-56 Price 1526-50 Price
64
(1626)
61
(1549)
60 x 30
(1524 x 762)
1522-57 Price 1526-51 Price
76
(1930)
73
(1854)
72 x 30
(1829 x 762)
1522-58 Price 1526-52 Price
100
(2540)
97
(2464)
96 x 30
(2438 x 762)
1522-60 Price 1526-54 Price

Fan/Filter Units

Fan/Filter Units
Model
W" x L"
(mm)
Avg. CFM
CFM
(m3/h)
Power With
HEPA Filter
With
ULPA Filter
Cat# Price Cat# Price
48 x 24
1219 x 610 
644
(1094.16)
120VAC, 50/60Hz
6601-24-H Price 6601-24-U Price
220VAC, 50Hz 6601-24-H-220 Price 6601-24-U-220 Price
36 x 24
914 x 610
477
(810.43)
120VAC, 50/60Hz
6601-23-H Price 6601-23-U Price
220VAC, 50Hz 6601-23-H-220 Price 6601-23-U-220 Price
24 x 24
610 x 610
310
(526.69)
120VAC, 50/60Hz
6601-22-H Price 6601-22-U Price
220VAC, 50Hz 6601-22-H-220 Price 6601-22-U-220 Price
Hoods — Vertical Laminar Flow Stations Illustration

Vertical Laminar Flow Stations color key


Laminar FLow Hoods — Control Panel
Laminar Flow Hoods — Strip shield access curtain
Touchscreen control panel provides convenient touchscreen control of light, sash and blower(s). Strip shield access curtain (optional)

Sterilization bulb
Terra Universal's Vertical Laminar Flow Station combines several of our most advanced products in a state-of-the-art work station that removes particulate air-borne contamination.

The backbone of the system is the reliable Filter/Fan Unit (FFU), which provides a flow of microfiltered air to meet cleanliness standards.

Patented baffling technology ensures uniform airflow across the filter face and attenuates sound for the lowest noise level in the industry: approximately 50 dBA (see "Specifications" below). Select the HEPA (High Efficiency Particulate Air) filter, rated 99.99% efficient removing 0.3-micron particles. Each unit includes a high/medium/low adjustment switch. The FFUs ship with the optinal level setting of "medium," pre-selected by the factory. 

Tests show that the work station exceeds Federal Standard 209E for a Class 100/ISO 5 work environment with HEPA filter.

Side and Front Panels Let You Control Laminar Flow

The Vertical Laminar Flow Station comes complete with static-dissipative PVC side panels that restrict the laminar flow and ensure an effective wash of HEPA filtered air over the entire work surface.

For additional control of the laminar flow, select the Motorized Shield; a sliding sash that can be adjusted up or down along the front of the access area to the level you require. This feature allows you to control the force of the laminar flow to accommodate your application: stronger flows ensure optimal cleanliness; and weaker flows reduce turbulence that might disturb small parts.

The Motorized Shield is made of Static-Dissipative PVC, a transparent material that features a surface resistivity of about 107 ohms/square. This static-dissipating characteristic eliminates not only static charges that can damage sensitive components, but also the particles that static charges attract. As a result, the sliding sash remains clean—inside and out.

VLF stations are available with work surfaces that accommodate every application. The standard work surface is a nonconductive laminate top sealed on all sides to meet cleanroom requirements. Others are available with tops made of dissipative laminate, 304 stainless steel, and polypropylene.

For delicate microscope operations, select the Vibration-Free Work Station, which eliminates up to 90% of all building vibrations to ensure a steady work surface.

Touchscreen Control Panel

A unique feature on this Vertical Laminar Flow Station is the easy-to-use digital trouchscreen control interface. From this panel located above the station's working area, the status of light, back-pressure and FFU speed can be monitored and controlled. NOTE: FFU hi/med/lo settings can only be changed by directly accessing the FFU. The speed (at any of these three settings) may be adjusted incrementally using the touchscreen control panel.

The up-and-down motion of the motorized shield is also controlled via this digital panel, on workstations thus equipped. 

Static Control

A 4" (102 mm) space under the HEPA filter accommodates optional ionizing equipment for complete static safety.

An ionizing bar houses nozzles that emit balanced streams of positive and negative ions downward to safely neutralize any static imbalances that may exist in the work area.


Laminar Flow Hoods — Operation with Terra Wet Processing Station

Operation with Terra Wet Processing Station

The Vertical Laminar Flow Station is completely compatible with Terra's Wet Processing Station. When operated together, these stations form an integrated processing system that accepts a host of wet processing modules to accommodate your applications.

Rear panel is made of polypropylene both for chemical resistance and to facilitate easier cut-outs for exhaust and other plumbing.

Terra Wet Processing Station
positioned beneath a Vertical Laminar Flow Hood

VLF Stations for Wet Station with polypropylene rear panel.



Specifications
General Construction: Fabricated of 1.5" x 3" (38 mm x 76 mm) 304 stainless or powder-coated steel members. FFUs encased in 304 stainless or powder-coat steel overhead housing. Base includes 1" (25 mm) steel-reinforced nylon leveling feet.
Rear Panel: Extends from hood to benchtop height, 31" (787 mm) above floor, to optimize laminar flow.
Stainless steel VLF has stainless steel rear panel.
Powder coated VLF has powder coated rear panel.
VLF for wet station has polypropylene rear panel.
Side Panels: 29"D x 32"H (737 mm x 813 mm) acrylic (static-dissipative PVC available)
Prefilters: Washable polyurethane foam, located at top of FFUs
Final Filters: 99.99% efficient HEPA (rated @ 0.3µm particles)
Fan Motor: Direct drive, forward curve, centrifugal-type with sealed bearings; rated for continuous duty; furnished with overload protection and a three-setting switch. Rated 0.25 HP @ low setting; 0.333HP @ high setting, 2' x 4' models (610 mm x 1219 mm)
Average airflow velocity: 90 (± 10) FPM (0.45 m/sec) at medium setting, measured 6" (152 mm) below filter face
FFU Air Flow: 650 (2' x 4') (610 mm x 1219 mm); 480 (2' x 3') (610 mm x 914 mm); 360 (2' x 2') (610 mm x 610 mm) - all models rated @ 90 FPM (0.45 m/s) at medium setting under HEPA filter load
Sound level: 50 dBA, measured no more than 30" (762 mm) from filter face @ 90 FPM (0.45 m/s)
Vibration level: 0.09 MILS
FFU housing: 0.63-inch (16 mm) thick aluminum with mill finish; includes integral air baffle system to ensure even air distribution. FFU fully encased in 304 stainless steel housing.
Lighting:
Fluorescent, 100 foot-candles. Does not disturb the air flow.
Electrical: 110VAC, 50/60Hz or 220VAC, 50 Hz. Meets the requirements of the National Electrical Code and applicable local codes. All components UL listed and CE marked.
Performance: Dust count exceeds Class 10 requirements.
Installation: System is shipped as turnkey system; no installation required.
Click to leave a message. 24-hour sales and tech phone support, M - F