2638-90C
Terra Part # 2638-90C
$18,138
Usually ships in 1-3 business days

Want it faster ? Read about FasTrak

Only 1 left in stock
Accessories related to Terra Part # 2638-90C
80384
Pass-Through; CleanMount CleanSeam, 24.5" W x 19.8" D x 17" H ID, Flush Wall Mount, 316L Stainless Steel, w/ Removable Racks
  • ISO Rating: ISO 6, ISO 7, ISO 8
  • Easy-to-sterilize 316L stainless steel cleanroom pass through for sterile bio-pharma applications
  • Obstruction free interior, lipless edges, radius corners, continuous welds for strict disinfection
  • CleanMount design allows for installation without drilling and prevents cleanroom shutdown for rapid servicing or replacement
  • Hidden automatic door interlock allows only one door to open at a time to prevent cross-contamination
  • Lift-off hinges allow doors to be easily removed for more thorough cleaning
  • Cleanroom pass throughs reduce foot traffic, improve cleanliness, safety, productivity, and much more.
  • Chamber Design:
  • All-316L stainless steel surfaces with enhanced corrosion resistance stand up to harsher cleaning agents and withstand degradation from bleach-based disinfectants.
  • Continuous welds with coved radius corners and lip-less edges eliminate hard-to-clean cracks and crevices where contaminants can collect.
  • Double-wall construction greatly increases rigidity and durability of the pass through chamber to facilitate installation and prevent warping on larger chambers.
  • Flush-mount design removes dust accumulating surfaces inside the cleanroom.
  • Dual BioSafe® stainless steel racks easily remove for cleaning or sterilizing and are reversible to allow slide-out motion in either direction.
  • Quick and Clean Installation:
  • Innovative fastening system clamps to a variety of wall thicknesses without penetrating or damaging the finished surrounding wall.
  • The mounting frame is covered on both sides for an easy-to-clean finish with no visible fasteners or screws.
  • Easy-to-install mounting system also allows the entire passthrough chamber to be seamlessly removed and reinstalled within minutes, without damaging the surrounding wall.
  • Hidden Automatic Door Interlock:
  • Hidden Interlock mechanism is mounted outside the transfer chamber (between double-wall) for easy-to-clean obstruction-free chamber interior.
  • Rugged and reliable CleanMount® mechanical interlock uses rigid stainless steel rods that run through the door and firmly lock into the lift latches.
  • Door Design:
  • Access doors with 316L stainless steel reinforced frames extend passthrough chamber's service life and provide a tight seal.
  • Santoprene® “e”-shape non-outgassing rubber gasket firmly compresses to eliminate leaks. The one-piece resilient rubber gasket maintains its shape after compression and won't flatten, warp, crack, or degrade like ordinary foam gasket. Gasket is also mechanically attached to the door frame to avoid adhesive failure common with gasket tapes.
  • Doors are leak-rated by UL for tight seal to maintain cleanroom pressure gradients.
  • Heavy-duty stainless steel lift latches minimize scratching, corrosion and contamination resulting over time that can occur with chrome-plated latches.
  • Sturdy "lift-off" stainless steel hinges are welded to the door frame and chamber. They are detachable to allow doors to easily lift off for more thorough cleaning/decontamination or trouble-free replacement.
  • Order replacement door(s) to avoid critical operation delays should a door be damaged and require immediate replacement.
  • Includes:
  • (1) Automatic mechanical interlock.
  • Dual BioSafe® stainless steel racks, easily removed for cleaning or sterilizing.
  • Mounting bracket system with cover plates. Standard mounting system accommodates 4”-6” wall thickness. Specify wall thickness at time of order.
  • Standard sized sloping top included for optional use on dirty side of pass-through. Exact fitting will vary based off customer wall depth and may not be feasible in some cases. Can be installed onto existing pass-through units.

Inside Depth: 19.8"

Inside Height: 17"

Inside Width: 24.5"

Concealed Interlock: Yes

Continuous-Seam Welds: Yes

Electropolished: Optional

HEPA/ULPA Filtration: No

Material: 316L Stainless Steel

Model: CleanMount CleanSeam

Mounting Position: Flush Wall

Special Door Configuration: Leak-Rated

Storage Racks: Included

Window Material: PVC

Unit of Measure: EA

Dimensions, Product: 35" W x 20.8" D x 28.32" H

Dimensions, Shipping: 40" W x 41.05" D x 41.32" H

Marks & Listings: CE, UL, ULC

Package Type: Crate

Weight, Product: 176 lb

Weight, Shipping: 408 lb

Buy Accessories
  1. Removable BioSafe shelf with runner: designed for easy removal and cleaning or autoclaving | 2639-00 displayed
    Request Quote
    Increase Down Increase Up
  2. Removable BioSafe wire shelf: designed for easy removal and cleaning or autoclaving | 2639-01 displayed
    Request Quote
    Increase Down Increase Up
  3. Removes solvents and other hazardous vapors from materials while they are in the pass-through | 6705-23 displayed
    $569
    Increase Down Increase Up
  4. 1/4" thick lead-lined double-wall pass-through | 2636-20 displayed
    Request Quote
    Increase Down Increase Up
  5. To prevent doors from opening completely, use a 90 degree door stop for flush mount pass through doors | 6705-98 displayed
    $405
    Increase Down Increase Up
  6. To prevent doors from opening completely, use a 90 degree door stop for flush mount pass through doors | 6705-98 displayed
    $405
    Increase Down Increase Up
  7. Warranty; 2 Year, Pass-Throughs, Parts
    Request Quote
    Increase Down Increase Up
  8. Warranty; 3 Year, Pass-Throughs, Parts
    Request Quote
    Increase Down Increase Up
  9. FasTrak 24-7 Expediting Service
    Request Quote
    Increase Down Increase Up
  10. Electropolish Service
    Request Quote
    Increase Down Increase Up
  11. White Glove Freight Service
    Request Quote
    Increase Down Increase Up
  12. Qualification Documentation (IQ/OQ) for Terra Universal System
    Request Quote
    Increase Down Increase Up
  13. Equipment Testing
    Request Quote
    Increase Down Increase Up
  14. UL Listing Declaration for Leak-Rated Pass-Throughs
    Request Quote
    Increase Down Increase Up

CleanMount® Pass-Through Chambers

  • Smart® Pass-Through Chambers by Terra Universal
  • CleanSeam+ Pass-Through
  • Cleanroom Pass-Through Chamber Video Overview Cleanroom Pass-Through Features and Selection Guide
  • Stainless Steel Passthrough Chamber Shown Flush-Mounted in Cleanroom Wall ISO 6 CleanMount® CleanSeam™ Stainless Steel Passthrough Chamber
  • Custom Stainless Steel Pass-Throughs Mounted in Compounding Pharmacy Cleanroom Custom CleanSeam™ Pass-throughs Mounted in Compounding Pharmacy Wall
  • Custom CleanSeam Stainless Steel Pass-through Chambers Custom CleanSeam™ Stainless Steel Pass-Through Chambers
  • Stainless Steel Cleanroom Pass-Through Chamber with Isolated Interlock ISO 6 CleamMount® CleanSeam™ Pass-through with Isolated Interlock
Cleanroom Pass-Through Chamber Video Overview

Features and Benefits

CleanMount Basics

CleanMount CleanSeam Pass-Through Chamber

CleanMount™ Design Allows Servicing or Replacement without Cleanroom Shutdown!
The simplicity of this CleanMount clamping system makes removal of the pass-through chamber just as easy as installation. If the wall cut-out framing is properly sealed prior to installation, the pass-through can be quickly removed and replaced without ever having to shut down the cleanroom. Maintain the positive-pressure differential and protect the cleanroom environment by sealing off the "dirty side" with plastic sheeting prior to removal. Loosen the lag bolt so that the pass-through lifts out of the wall without contaminating the room. Once out, the pass-through can be serviced, modified, or even replaced with an upgraded version to accommodate new applications.
A - Inside of flush-mount bracket on opposing side
B - Bolt guide extending from nut welded to opposing bracket
C - Mounting bolt (one, two or three per side, depending on chamber height) - standard sizes accommodate any wall thicknesses
D - Mounting bracket
E - Bracket cover
F - Standard wall (masonry or drywall)
dry wall cut-out for installing cleanroom passthrough chamber Finish cut-out framing to minimize contamination exposure during servicing Terra's quick-mount system installs in under five minutes, regardless of wall thickness and without contamination
Access Clearances
Width = W (nominal) – 1.88”
Depth = D (nominal) – 0.12”
Height = H (nominal) – 1.25”

Retrofittable on Existing Units

Slope tops for double wall pass-throughs can be installed onto new or existing units. Designed for rapid installation without penetrating the chamber. Now comes standard on certain models

Products Compliant With Your ISO Rating

Provide Terra with your desired ISO rating. We will tailor the product to meet your rating and certify it with the serial numbers appended to your invoice, to be included in your compliance package.
Popular Accessories
For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Pass Through Racks

    Designed to be installed into any pass through. Install these racks within minutes with no special tools. Simply tighten a compression screw. Forgot to order racks before? No problem!
  • Removable Slide-Out Shelves

    BioSafe EZ-Out stainless steel shelves slide out to provide easy access to materials passed into the pass-through chamber.
  • Electropolish Finish

    Electropolishing increases corrosion resistance and improves ease of cleaning with a smooth, reflective, mirror-like finish.
  • 304 Stainless Steel Sliding Tray for Cleanroom Pass Through

    Securely hold small parts during transfer with this dual-motion sliding tray in corrosion-resistant 304 stainless steel. Tray attaches to sliding runners inside a pass-through to allow full tray extension in both directions for convenient material handling.

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.

Hide
You need at least 2 products to compare Compare Clear All
Compare Products