FREE CONSULTATION714-578-6100
  1. Home
  2. Glove Boxes
  3. Overview and Applications
  4. Isolation Glove Boxes
  5. Inert Gas Glove Box Isolator

Inert Gas Processing and Seam Welding Glove Box Isolator

Inert Gas Processing and Seam Welding Glove Box Isolator
Model shown: Series 300 Stainless Steel Glove Box

Inert Gas Processing and Seam Welding Glove Box Isolator illustration
Application Requirements
  • Temperature: Degassing at up to 300°C in pass-through oven
  • Humidity: Subambient to 0%RH (± 2% RH)
  • Process Gas: 20% He/80%N2 (mixture accurate to 5 ppm)
  • Pressure: 0.1" WG
  • Access: Accordion sleeve gloves. Air lock for parts removal Quick-Connect bulkheads for welding electrodes
  • ESD Safety: Static neutralization in less than 30 sec. (1KV to 100V)

To eliminate embrittlements that result from a high-humidity welding environment, this glove box isolator maintains a dry nitrogen environment with automated humidity controls.

The glove box isolator features a pass-through vacuum/nitrogen oven for degassing at temperatures up to 300°C, and a right-side air lock for easy parts removal. A trace gas mixer provides a precise He/N2 gas mixture during seam welding, which allows for subsequent leak detection in a vacuum chamber. Ionization equipment provides fail-safe static neutralization to protect against ESD in the low-humidity environment.

Sealed quick-connect ports permit easy connection of welding electrodes, and dual service utility outlets are provided for 110/220VAC, 50/60Hz power.
24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com