727e205cd26b878f_640_charcoal

Charcoal Filters 101 for Critical Environments

Activated charcoal is highly porous carbon used in air filters to capture solvent fumes and organic compounds by adsorption of molecules (van der Waals forces).  Unlike particle filters, which rely on micro-pores to capture solid contaminants suspended in air, Terra’s coconut-shell based charcoal filters remove a wide range of chemical fumes and odors common to laboratories and manufacturing environments.  To understand chemical vapor filtration, let’s first focus on what having a carbon-based filter means.

Did you know…

Traditional charcoal is a common commodity, found in everyday-homes (cooking barbecues, vacuum cleaners, etc.). But did you know your water filter may contain activated carbon? Drinking water is often filtered through activated charcoal to remove certain toxins, andcoconut photo improve the odor and taste.

What does “activated” mean?

There are a couple of methods to making charcoal active. Terra’s charcoal filters undergo a chemical heating process. This results in millions of diminutive pores that increase surface area bonding sites to adsorb molecules— far more efficient than a non-activated charcoal filter. Forming accordion folds with the material further increases the ability of Terra’s charcoal filters to effectively remove fumes and odors. A larger surface with more adsorption sites leads to a longer-lasting filter.

The difference between activated charcoal and particle filters

Activated charcoal filters are extremely effective at adsorbing fumes in a negative pressure controlled work space where contaminant containment is vital. While HEPA and ULPA filters capture most airborne particulates, they are incapable of removing the odors that may be released into your beaker photocontrolled space from either chemicals or by-products of your application tasks. Certain non-hazardous chemicals can act as irritants to personnel who work in close proximity with them for long periods of time. If these odors are not removed, personnel productivity levels go down and safety concerns go up. Terra’s activated charcoal filters approach 100% in their capture efficiency with common organic fumes like hydrocarbons, creating a safer, more comfortable environment. They can be used in chemical or ductless exhaust fume hoods and when used in a fan/filter unit (FFU), the carbon filter can be paired with a pre-filter, or HEPA or ULPA particle filter. Additionally, impregnated charcoal filters can optimize performance with specific chemicals. Caustic impregnated carbon protects against organic and mineral acids, halides, VOCs, and sulfur compounds, while acid impregnated filters safeguard against amines and acetate.

Does the filter need to be changed?laminar_flow_hood_filters_carbon-a4

Just like your at-home water filter, cleanroom activated carbon filters have a service life. Over time, molecules accumulate in the filter, depleting the available chemical bonding sites on the filter. . When this occurs, the filter has reached its Threshold Limit Value (TLV) and needs to be changed. The TLV frequency varies depending on the operating conditions and the type of chemical compounds being filtered.

When will I know it’s saturated?

When particle filters need to be changed, you will notice changes in pressure differential and velocity. For charcoal, there are two effective ways to know when a replacement is needed: 1) safety_formaldehyde_meter_hal_HFX205-1the filter is heavier than when it was first installed (so take a baseline weight before you start using it), and 2) you will start to detect odors that have slipped through the filter, telling you that it’s saturated. You can also use chemical detector equipment to test for the presence of specific vapors in the filtered air. By monitoring filter performance closely when the system is placed in operation, you can set a replacement schedule. As long as working conditions are relatively consistent, filter replacement should take place within the same approximate period of time.

When it comes to the safety and comfort of your cleanroom operations, activated charcoal filters provide coverage that HEPA and ULPA filters can’t. Their efficient and effective porous surface adsorbs most airborne chemical fumes and odors—an irritant that, with prolonged exposure, may disturb or even harm personnel.  A comfortable and safe working environment will increase efficiency and productivity.

Click here for more information on Activated Charcoal Filters.

 

 

Terra Universal

Terra Universal

Terra Universal is the leading manufacturing expert in critical environment applications, with nearly 40 years of design and fabrication experience in cleanroom- and laboratory-based industries. Terra manufactures comprehensive lines of modular cleanrooms, pass-through chambers, glove boxes, laminar flow benches and furnishings. Custom work is no problem; our engineers work with yours to meet unique requirements.
Terra Universal